Vinyl Matt (Tinted) Daffodil 5L

£40.74 inc. VAT
Trade customer? - log in to get your prices. close

Tell us where you are to check stock for Click & Collect:

Durable, high obliteration, high opacity, matt finish, suitable for interior use on walls and ceilings
Vinyl Matt (Tinted)

In detail

Albany Matt is a low VOC content matt finish. It is a wipeable product which is thinned with water and is applied by brush or roller. 

Albany Matt is suitable for interior use. Touch dry in 2 hours and recoatable after 4 hours.

All surfaces must be clean and suitably dry. Powdery, polished plaster or dense surfaces should be primed with Albany Primer Sealer. Porous surfaces should be 'mist' coated with Albany Vinyl Matt Emulsion thinned with up to 20% clean water. Organic growth must be removed and the areas treated with Albany Fungicidal Wash.

Application Methods
Airless Spray, Brush, HVLP Spray, Roller
Up to 16sq/m per litre 
VOC level
Touch dry
1-4 hours 
1-4 hours 
Suitable for...
Interior use 
Colour type
Water & Detergent 

* Colours on screen may vary from actual paint

Available colours

Albany Vinyl Matt (Tinted) is available in 3434 colours from the Albany Colour Cards.

    Browse colours

    Always ask your client to try their colour choice on the wall first. Colour cards and emulsion sample pots are available at your local Brewers or at

    Additional information

    Albany Vinyl Matt Emulsion is suitable for a wide variety of new or previously painted interior wall surfaces where a flat finish is required.


    Surfaces must be clean, dry and free from grease or dust. Remove all loose material. Defective paint must be removed and the surface primed if necessary with the appropriate Albany Primer. Glossy surfaces should be thoroughly abraded before application to ensure good adhesion. Avoid the inhalation of dust, wear a suitable face mask if dry sanding.


    • Stir well before use. Apply by brush, roller or spray.
    • For best results 2 coats are recommended.
    • For new dry plaster or highly porous surfaces, dilute 40% by volume with clean water for first coat only as a primer.
    • Avoid using during periods of high humidity or in temperatures below 8°C.
    • One litre covers up to 16 sq metres depending upon surface texture, porosity and the method of application.
    • Surface dry in 2 hours. Recoatable after 4 hours.
    • Clean equipment immediately after use with water.