Albany
Supercover White 12L

AA0127002D
Store stocked line
£37.99 inc. VAT
Trade customer? - log in to get your prices. close

Tell us where you are to check stock for Click & Collect:

Albany Supercover White is fast drying, high opacity, matt finish for interior use on walls and ceilings.
Share...

In detail

Albany Supercover is a high opacity matt emulsion for interior walls and ceilings. It has a smooth consistency and excellent breathability for decoration on newly plastered walls when thinned as indicated. Ideal where only a decorative matt finish is required. 
Albany Supercover can be applied by brush, roller or airless spray. Stir well before use. Touch dry in 2 hours and recoatable after 4 hours.

All surfaces must be clean and suitably dry before application. Powdery, polished plaster or dense surfaces should be primed with Albany Primer Sealer. Porous surfaces should be 'mist' coated with Albany High Opacity Supercover thinned with up to 10% clean water. 

Also available to order in a wide range of tinted colours.

Size
12L 
Application Methods
Airless Spray, Brush, HVLP Spray, Roller
Coverage
Up to 16sq/m per litre 
VOC level
Low 
Thinning
Water 
Touch dry
1-4 hours 
Recoatable
4-8 hours 
Suitable for...
Interior use 
Colour
White 
Colour type
White 
Finish
Matt 
Cleanup
Water & Detergent 
Base
Water-Based 

* Colours on screen may vary from actual paint

Additional information

Albany Supercover is a high opacity, smooth, water borne matt finish for interior walls and ceilings. It is ideal for use on new plaster when thinned as indicated below.

Preparation
Surfaces must be clean, dry and free from grease or dust. Remove all loose material. Avoid the inhalation of dust. Wear a suitable face mask if dry sanding. Defective paint must be removed and the surface treated by applying a sealer coat thinned with up to 10% clean water. Powdery surfaces must be treated with the appropriate Albany Primer. For more information, contact the supplier.

Application
  • Stir well before use. Apply by brush, roller or spray.
  • For best results 2 coats are recommended.
  • On new dry plaster or highly porous surfaces, dilute 40% by volume with clean water for first coat only as a primer.
  • Avoid using during periods of high humidity or in temperatures below 8°C.
  • One litre covers up to 16 sq metres, depending upon surface texture, porosity and the method of application.
  • Surface dry in 2 hours. Recoatable after 4 hours.
  • Clean equipment immediately after use with water.