Permoglaze Acrylic Eggshell is a fast drying, low odour, water-based alternative to solvent-borne Eggshell. Ideal for use in areas subject to high condensation and steam, it has a highly durable satin lustre finish which is washable.
Ensure surfaces are sound, clean, dry and properly prepared. Wet abrade glossy surfaces to provide a key. Remove all residues. Allow to dry. Avoid the inhalation of dust. Wear a suitable face mask if dry sanding. Treat organic growth with a proprietary fungicidal treatment. Prime bare surfaces using the appropriate Permoglaze Primer. No undercoat is required.
Apply by brush, roller or airless spray. To the prepared surface apply 2 coats of Permoglaze Acrylic Eggshell. Some strong colours may require an additional coat to ensure complete obliteration. Do not apply when air or substrate temperatures are likely to fall below 8°C or when the relative humidity is above 80% during application or the drying period.
Up to 12m² per litre dependent on surface texture and porosity.
Touch dry in 1 - 2 hours, recoatable after 4 hours.
Clean equipment in water immediately after use.
Transportation and Storage
Ensure this pack is stored upright and secure at all times.
Protect this pack from extreme hot and cold temperatures.