Crown Trade
Full Undercoat (Tinted) 5L

£55.50 inc. VAT
Please choose a colour before adding to your basket
Trade customer? - log in to get your prices. close

Tell us where you are to check stock for Click & Collect:

Excellent adhesion and opacity, finish for interior and exterior use. Good wet edge retention.
Full Undercoat (Tinted)

In detail

Crown Trade Full Undercoat is a high VOC content finish. An oil based product that is applied by brush and is suitable for interior and exterior use. 

Touch dry in 4-6 hours and recoatable after 16-24 hours.

Do not apply when air or substrate temperatures are likely to fall below 8°C or when the relative humidity is above 80% during application or the drying period.

Application Methods
Brush, Roller
Up to 18sq/m per litre 
VOC level
Not Recommended 
Touch dry
5-8 hours 
12-24 hours 
Colour type
Brush cleaner or White spirit 

* Colours on screen may vary from actual paint

Available colours

Crown Trade Full Undercoat (Tinted) is available in 79 colours from the Crown Trade Colour Cards.

    Browse colours

    Always ask your client to try their colour choice on the wall first. Colour cards and emulsion sample pots are available at your local Brewers or at

    Additional information

    For Interior and Exterior use. Crown Trade Full Undercoat is a high quality undercoat with superior filling properties.
    Full Undercoat provides excellent obliteration, maximum gloss hold-out and good edge retention and is the perfect foundation for Crown Trade Gloss.

    Ensure all surfaces are sound, dry, clean and free from dirt, oil, grease or other contamination. Bare or friable surfaces should be primed with the appropriate Crown Trade Primer.
    Existing paintwork in sound condition should be washed down with a warm water detergent solution and abraded.
    Avoid the inhalation of dust. Wear a suitable face mask if dry sanding. For further information contact our Customer Relations Team.

    Stir thoroughly. May be applied by brush or roller. A characteristic of the new technology used in this product is that whiteness intensifies as the paint dries.
    Do not use in temperatures below 8°C or in high humidity.

    Spreading Capacity
    Up to 18m² per litre. Spreading rate dependent on surface texture and porosity.

    Touch dry in 4-6 hours.
    Overcoatable after 16 hours.