Crown Trade
Matt Vinyl Colour (Tinted) 5L

AD0109005F
Quick drying, easy to apply, matt finish, excellent opacity for interior use, suitable for walls & ceilings.
Matt Vinyl Colour (Tinted)
Share...

In detail

Crown Trade Matt Vinyl is a low VOC content matt finish. A wipeable product which is thinned with water and is applied by brush, roller, airless spray or HVLP Spray and is suitable for interior use. 

Touch dry in 1-2 hours and recoatable after 4 hours. Matt emulsion is a decorative coating providing a flat finish for use on walls and ceilings. 

Wipeable products are suitable for light traffic areas where occasional cleaning is required. 

Can be applied to coated plaster surfaces without thinning. On new plaster, thin the first coat with water to manufacturers recommendations.

Size
5L 
Application Methods
Airless Spray, Brush, HVLP Spray, Roller
Coverage
Up to 17sq/m per litre 
VOC level
Low 
Thinning
Water 
Touch dry
1-4 hours 
Recoatable
1-4 hours 
Suitable for...
Interior use 
Scrubbability
Wipeable 
Colour type
Tinted 
Finish
Matt 
Cleanup
Water & Detergent 
Base
Water 

* Colours on screen may vary from actual paint

Available colours

Crown Trade Matt Vinyl Colour (Tinted) is available in 16234 colours from the Crown Trade Colour Cards.

    Browse colours

    Always ask your client to try their colour choice on the wall first. Colour cards and emulsion sample pots are available at your local Brewers or at designerpaint.com

    Additional information

    FOR INTERIOR USE

    Crown Trade's formulation provides a decorative and durable finish and has exceptional hiding power.


    Preparation

    Ensure all surfaces are sound, dry, clean and free from dirt, oil, grease or other contamination. Avoid the inhalation of dust. Wear a suitable face mask if dry sanding. For further information contact our Customer Relations Team.


    Application

    Stir thoroughly. This product is recommended for use as supplied.

    On new or highly porous surfaces: Thin 40% by volume with clean water for first or primary coat only.

    By airless spray: Thin up to a maximum of 10% by volume with clean water. Use 0.013"-0.015" fluid tip and pump pressure of approximately 2250lb per square inch.

    AVOID OVERTHINNING. 

    Do not apply in temperatures below 8°C or in high humidity.


    Spreading Capacity

    Up to 17m² per titre. Spreading rate dependent upon surface texture and porosity.


    Drying

    Touch dry in 1-2 hours.

    Recoatable after 4 hours.


    Cleaning

    Clean equipment with water immediately after use.


    Transportation and Storage

    Ensure this pack is stored upright and secure at all times.

    Protect this pack from extreme hot and cold temperatures.