Silk Vinyl Brilliant White 2.5L
AD0111001J
FREE next working day delivery available
Trade customer? - log in to get your prices. close
Quick drying, excellent opacity, high sheen finish for interior use on walls and ceilings. Creating a tough, washable finish.
Share...
In detail
Crown Trade Silk Vinyl is a low VOC content mid sheen finish. A washable product which is thinned with water and is applied by brush, roller or spray and is suitable for interior use.
Touch dry in 1-2 hours and recoatable after 4 hours. Soft Sheen emulsion is a decorative coating providing a low sheen finish for use on walls and ceilings.
Washable products are ideal for medium traffic areas such as lounges and bedrooms.
Can be applied to coated plaster surfaces without thinning. On new plaster, it is ideal to use a thinned first coat of matt emulsion or contract emulsion as a priming coat, prior to finishing with soft sheen emulsion.
- Size
- 2.5L
- Application Methods
- Airless Spray, Brush, HVLP Spray, Roller
- Coverage
- Up to 16sq/m per litre
- VOC level
- Low
- Thinning
- Water
- Touch dry
- 1-4 hours
- Recoatable
- 1-4 hours
- Suitable for...
- Interior use
- Scrubbability
- Washable
- Colour
- Brilliant White
- Colour type
- White
- Finish
- Silk
- Cleanup
- Water & Detergent
- Base
- Water
* Colours on screen may vary from actual paint
Data sheets
Additional information
FOR INTERIOR USE
Crown Trade's formulation provides a highly decorative, washable high sheen finish.
Preparation
Ensure all surfaces are sound, dry, clean and free from dirt, oil, grease or other contamination. Remove any loose or flaking material. Avoid the inhalation of dust. Wear a suitable face mask if dry sanding. For further information contact our Customer Relations Team.
Application
This product is recommended for use as supplied.
On new plaster or highly porous surfaces 1st coat: Thin 40% by volume with clean water, for first or primary coats only.
For application by airless spray: Thin up to a maximum of 10% by volume with clean water. Use 0.013"-0.015" fluid tip and pump pressure of approximately 2250lb per square inch.
AVOID OVERTHINNING
Do not use in temperatures below 8°C or in high humidity.
Spreading Capacity
Up to 16m² per litre. Spreading rate dependent on surface texture and porosity.
Drying
Touch dry in 1-2 hours.
Recoatable after 4 hours.
Cleaning
Clean equipment with water immediately after use.
Transportation and Storage
Ensure this pack is stored upright and secure at all times. Crown Paints Ltd cannot accept liability for damage caused by spillage. Do not store below 5°C or above 40°C.
