Stronghold Exterior Primer Undercoat Dark Grey (Ready Mixed) 2.5L
In detail
Crown Trade Stronghold Exterior Primer Undercoat is a high VOC content finish and is applied by brush and is suitable for exterior use.
Do not apply when air or substrate temperatures are likely to fall below 8°C or when the relative humidity is above 80% during application or the drying period.
- Size
- 2.5L
- Application Methods
- Brush
- Coverage
- Up to 15sq/m per litre
- VOC level
- High
- Thinning
- Not Recommended
- Touch dry
- 1-4 hours
- Recoatable
- 12-24 hours
- Colour
- Dark Grey
- Cleanup
- Brush cleaner or White spirit
- Base
- Oil
* Colours on screen may vary from actual paint
Data sheets
Additional information
For Exterior use. Crown Trade Stronghold Exterior Primer Undercoat is the first step in the Crown Trade Stronghold Exterior Gloss system. It has been formulated to provide long lasting, high gloss protection for exterior wood. It may also be used as an undercoat on correctly primed metal. Crown Trade Stronghold Exterior Primer Undercoat can be used on primed or unprimed wood or over existing paint. It also seals wood and provides a flexible base on which to apply Crown Trade Stronghold Exterior Gloss.
Preparation
Ensure all surfaces are sound, dry, clean and free from dirt, oil, grease or other contamination. Any grey or denatured timber will need sanding back to a clean smooth surface. Ensure all loose and flaking material is removed.
For bare wood and maximum flexibility: apply one coat of Crown Trade Stronghold Primer / Undercoat followed by two coats of Crown Trade Stronghold Exterior Gloss.
For previously painted surfaces in sound condition: wash with a warm water detergent solution and thoroughly abrade. For maximum protection one coat of Crown Trade Stronghold Primer / Undercoat followed by one or two coats of Crown Trade Stronghold Exterior Gloss is recommended. Wood should have a moisture content below 18%. Avoid the inhalation of dust. Wear a suitable face mask if dry sanding. For further information contact our Customer Relations Team.
Application
Stir thoroughly. Apply by brush only. Do not use in temperatures below 8°C or in high humidity.
Spreading Capacity
Approximately 15m2 per litre on a smooth surface of low porosity.
Drying
Touch dry from 4-6 hours.
Recoatable after 16 hours.
Cleaning
Clean equipment with a proprietary cleaner immediately after use.
Transportation and Storage
Ensure this pack is stored upright and secure at all times. Crown Paints Ltd cannot accept liability for damage caused by spillage. Do not store below 5°C or above 40°C.
){kind=link}