Crown Trade
Steracryl Anti-Bacterial Scrubbable Matt (Tinted) 5L

Excellent stain resistance, high opacity, scrubbable matt finish for interior use ideal for high traffic areas
Steracryl Anti-Bacterial Scrubbable Matt (Tinted)

In detail

Crown Trade Steracryl Anti-Bacterial Matt is a low VOC content matt finish. A scrubbable product which is thinned with water and is applied by brush, roller, airless spray or HVLP Spray and is suitable for interior use. 

Touch dry in 2 hours and recoatable after 4 hours. Anti-Bacterial coatings are suitable where bacterial protection is required such as hospitals and schools.

With a highly scrubbable finish it is an ideal product for high traffic areas such as hallways, kitchens and bathrooms.

Can be applied to coated plaster surfaces without thinning. On new plaster, thin the first coat with water to manufacturers recommendations.

Up to 14sq/m per litre 
VOC level
Touch dry
1-4 hours 
1-4 hours 
Suitable for...
Interior use 
Water & Detergent 

* Colours on screen may vary from actual paint

Available colours

Crown Trade Steracryl Anti-Bacterial Scrubbable Matt (Tinted) is available in 4337 colours from the Crown Trade Colour Cards.

    Browse colours

    Always ask your client to try their colour choice on the wall first. Colour cards and emulsion sample pots are available at your local Brewers or at

    Additional information

    Surface Preparation

    New Surfaces

    All surfaces must be sound, clean, suitably dry and free from anything that will interfere with the adhesion of the materials to be applied. Powdery surfaces should be primed with one coat of Sandtex Trade Water Based Stabilising Solution. Polished or dense surfaces should be primed with Crown Trade Alkali Resisting Sealer or where a water-based alternative is required Crown Trade Grip Extreme.

    Porous surfaces should be coated with a ‘mist’ coat of Crown Trade Clean Extreme Anti Bacterial Acrylic Eggshell diluted with 40% clean water by volume. Where clean water is not available, apply one coat of Crown Trade Covermatt Drywall Primer. Any areas of surface filling after priming should be touched in with the priming or mist coat diluted as for main areas.

    Previously Decorated Surfaces

    All surfaces must be sound, clean, suitably dry and free from anything that will interfere with the adhesion of the materials to be applied e.g. dirt, grease etc. Remove all loose, failing or suspect paint. Feather edges of sound paint. Organic growth must be removed and the areas treated with Crown Trade Fungicidal Solution.

    Fill any fixing holes, cracks and shallow surface defects with Sandtex Trade Ready Mixed Filler. Patch prime bare, filled and powdery areas as for new surfaces above. Wash remaining sound paint with hot water and liquid detergent solution to remove any contaminants, frequently changing the water.

    Any glossy or eggshell surfaces should be wet abraded to provide a key. Rinse with clean water to remove all residues. Allow to dry. If after cleaning any areas are still contaminated with substances likely to cause staining and / or bleeding, patch prime with one coat of Crown Trade PSB Stain Block Primer.


    Stir well before use. Apply using a good quality paint brush or medium pile roller. For spray application, dilution up to 15% may be required, depending on type and make of spray equipment.

    Always intermix packs for colour consistency. Please check for colour accuracy prior to application.

    Clearing Up

    Return surplus material to container. Clean with clean water immediately after use.