- Application Methods
- Up to 15sq/m per litre
- VOC level
- Not Recommended
- Touch dry
- 1-4 hours
- 12-24 hours
- Suitable for...
- Exterior use
- Colour type
- Brush cleaner or White spirit
* Colours on screen may vary from actual paint
Surfaces must be clean and free from anything that will interfere with the materials to be applied. Wash with hot water and liquid detergent solution to remove oil, grease or any other contaminants, frequently changing the water. Rinse thoroughly with clean water. Allow to dry.
Galvanised surfaces should be pre-treated with Crown Trade Protective Coatings T Wash.
Lightly abrade to a bright (not polished) surface – excluding galvanised surfaces. Rinse thoroughly with clean water to remove all residues. Allow to dry.
Remove all millscale and rust back to clean metal. Remove all residues. Prime all bare metalwork within the working day.
Stir well before use. Apply by brush, roller or spray.
Return surplus material to container. Clean with proprietary cleaner immediately after use.