Crown Trade
Protective Coatings High Performance Gloss (Tinted) 2.5L

£57.23 inc. VAT
Please choose a colour before adding to your basket
Trade customer? - log in to get your prices. close

Tell us where you are to check stock for Click & Collect:

High performance, oil based, gloss finish for exterior use
Protective Coatings High Performance Gloss (Tinted)

In detail

Crown Trade Protective Coatings High Performance Gloss is a high VOC content gloss finish. A washable oil based product that is applied by brush. Suitable for exterior use. 

Touch dry in 4-6 hours and recoatable after 16-24 hours. Gloss is a tough, durable high sheen finish for wood and metal, providing good resistance to knocking and scuffing.

Can be applied over most previously painted surfaces without an undercoat. On new surfaces apply over the top of a suitable primer and undercoat.

Application Methods
Up to 15sq/m per litre 
VOC level
Not Recommended 
Touch dry
1-4 hours 
12-24 hours 
Suitable for...
Exterior use 
Colour type
Brush cleaner or White spirit 

* Colours on screen may vary from actual paint

Available colours

Crown Trade Protective Coatings High Performance Gloss (Tinted) is available in 331 colours from the Crown Trade Colour Cards.

    Browse colours

    Always ask your client to try their colour choice on the wall first. Colour cards and emulsion sample pots are available at your local Brewers or at

    Additional information

    Surface Preparation

    Surfaces must be clean and free from anything that will interfere with the materials to be applied. Wash with hot water and liquid detergent solution to remove oil, grease or any other contaminants, frequently changing the water. Rinse thoroughly with clean water. Allow to dry.

    Galvanised surfaces should be pre-treated with Crown Trade Protective Coatings T Wash.

    Non-Ferrous Metals

    Lightly abrade to a bright (not polished) surface – excluding galvanised surfaces. Rinse thoroughly with clean water to remove all residues. Allow to dry.

    Ferrous Metals

    Remove all millscale and rust back to clean metal. Remove all residues. Prime all bare metalwork within the working day.


    Stir well before use. Apply by brush, roller or spray.

    Clearing Up

    Return surplus material to container. Clean with proprietary cleaner immediately after use.