Crown Trade
Concrete Floor Paint Mid Green (Ready Mixed) 5L

AD056505F
Economical, hard-wearing finish for interior use on concrete floors in warehouses, shops and showrooms
Concrete Floor Paint Mid Green (Ready Mixed)
Share...

In detail

Crown Trade Concrete Floor Paint is a high VOC content mid sheen finish. A washable product that is applied by brush or roller and is suitable for interior use. 

Under normal drying conditions surface dry after 3 hours and recoatable after 6 hours depending on drying conditions and film thickness. Allow for adequate ventilation during the drying period. Recoat within 48 hours.

Do not apply when air or substrate temperatures are likely to fall below 8°C or when the relative humidity is above 80% during application or the drying period. 

Size
5L 
Application Methods
Brush, Roller
Coverage
Up to 15sq/m per litre 
VOC level
High 
Thinning
Not Recommended 
Touch dry
1-4 hours 
Recoatable
4-8 hours 
Scrubbability
Washable 
Colour
Mid Green 
Finish
Satin 
Cleanup
Brush cleaner or White spirit 

Additional information

For Interior Use
A fast drying decorative solvent-borne paint with a semi gloss finish for use on correctly prepared concrete floors. Suitable for use in light traffic areas such as shops and showrooms.

Preparation
Ensure all surfaces are sound, dry, clean and free from dirt, oil, grease or other contamination.
Ensure all loose and flaking material is removed to a firm sound edge. 
Untreated floors: An effective damp proof membrane must be present beneath concrete and masonry floors. Remove surface latence using a proprietary cement cleaner to instructions. New concrete must be left at least six months to dry out in depth before painting.
Previously painted floors: Thoroughly sand, rinse and remove all residues. Avoid the inhalation of dust. Wear a suitable face mask if dry sanding. Do not apply over bituminous or asphaltic composition or certain treated floors. Crown Trade Concrete Floor Paint should not be used where it is likely to be in contact with standing water. Power floated floors should be surface etched by blast treatment.

Application
Stir thoroughly. Always intermix packs for colour consistency. Please check
for colour accuracy prior to application. Crown Paints is not liable for
decorating costs caused as a result of an incorrect colour being applied.
Apply by brush or roller.
Untreated floors: Apply the first coat of Concrete Floor Paint thinned with
up to 10% white spirit. For the second coat use as supplied.
Previously painted floors: Any bare areas prime as for untreated floors.
Apply one or two coats of Concrete Floor Paint as supplied.
Do not apply in temperatures below 8°C or in high humidity.
Note: in some instances a third coat may be necessary.

Spreading Capacity
Up to 15m² per litre on a smooth non absorbent surface.

Drying
Touch dry in 3 hours.
Recoatable after 6 hours, depending on conditions and film thickness.

Cleaning
Clean equipment with a proprietary cleaner immediately after use.

Transportation and Storage
Ensure this pack is stored upright and secure at all times.
Crown Paints Ltd cannot accept liability for damage caused by spillage.
Do not store below 5°C or above 40°C.