Grip Extreme Fast Drying Primer 5L
Call to check stock at your local Brewers
In detail
Crown Trade Grip Extreme Fast Drying Primer is for problem surfaces where adhesion cannot normally be obtained.
- Size
- 5L
- Application Methods
- Airless Spray, Brush, Roller
- Coverage
- Up to 14sq/m per litre
- VOC level
- Low
- Thinning
- Water
- Touch dry
- 1-4 hours
- Recoatable
- Up to 1 hour
- Colour
- White
- Cleanup
- Water & Detergent
Data sheets
Health and Safety Data Sheet
The Health and safety data sheet for Grip Extreme Fast Drying Primer 5LAdditional information
For Interior and Exterior use
Crown Trade Grip Extreme Primer is a rapid drying, adhesion promoting primer that will also isolate stains such as nicotine. It is ideal for use over difficult substrates including, glass, ceramic tile, melamine, previously painted surfaces as well as most wood and non-ferrous metals.
Preparation
Ensure all surfaces are sound, dry, clean and free from dirt, oil, grease or other contaminants. Some surfaces may require light sanding before application. Avoid the inhalation of dust. Wear a suitable face mask if dry sanding.
Application
Stir thoroughly. May be applied by brush, roller or airless spray. Apply the primer liberally. Due to its rapid drying time, avoid over working. For airless spray application, dilute with up to 10% clean water. Use 0.015"-0.017" fluid tip and pump pressure of approximately 25001b per square inch. Do not apply when air or substrate temperatures are likely to fall below 8°C or in damp or humid conditions.
Spreading Capacity
Up to 14m² per litre dependent upon surface texture and porosity.
Drying
Touch dry in 1 hour. Recoatable after 1 hour (adverse conditions may inhibit the recoat drying time).
Cleaning
Clean equipment with water immediately after use.
Transportation and Storage
Ensure this pack is stored upright and secure at all times. Crown Paints Ltd cannot accept liability for damage caused by spillage. Do not store below 5°C or above 40°C.
