Crown
Solo One Coat Gloss Brilliant White 2.5L
AD501005J
FREE next working day delivery available
Trade customer? - log in to get your prices. close
Oil based, one coat, gloss finish for interior and exterior woodwork & metalwork
Share...
In detail
Crown Solo One Coat Gloss is a high VOC content gloss finish. A washable oil based product that is applied by brush and is suitable for interior and exterior use.
Touch dry in 6 hours and recoatable after 16-24 hours. Gloss is a tough, durable high sheen finish for wood and metal, providing good resistance to knocking and scuffing.
Can be applied over most previously painted surfaces without an undercoat. On new surfaces apply over the top of a suitable primer and undercoat.
- Size
- 2.5L
- Application Methods
- Brush
- Coverage
- Up to 12sq/m per litre
- VOC level
- High
- Thinning
- Not Recommended
- Touch dry
- 4-8 hours
- Recoatable
- 12-24 hours
- Scrubbability
- Washable
- Colour
- Brilliant White
- Colour type
- White
- Finish
- Gloss
- Cleanup
- Brush cleaner or White spirit
- Base
- Oil
* Colours on screen may vary from actual paint
Additional information
For wood & metal.
Before you start
Planning ahead really helps, prepare the surfaces and choose the right tools.
- If necessary, move or cover your furniture.
- Make sure all surfaces are clean, dry and free from dirt, grease and grime.
- Thoroughly abrade pre-painted surfaces to provide a key.
- Don't forget to keep the room well ventilated, this helps reduce drying times.
- Make sure you wear a suitable mask to protect yourself from inhaling dust when dry sanding. Remember to take extra care when preparing pre-1960's surfaces as these may contain harmful lead. If you need advice on this, give us a call.
How to use
- If you're painting new wood or metal, you will need to prime the surface by using a suitable primer/undercoat.
- Stir paint if there is any surface film. Load your brush generously and apply nice and evenly, make sure you don't overspread.
- In warm conditions the paint can dry rapidly and over brushing should be avoided.
- Don't apply in really damp or humid conditions or in room temperatures below 10°C.
- When you've finished, wash your equipment thoroughly with a proprietary cleaner.
