Dulux Trade
Mouldshield Fungicidal Eggshell Colour (Tinted) S0530G60Y 5L

AE0135030F
NCS: S0530G60Y
A high opacity mould inhibiting finish for interior walls and ceilings. Helps inhibit the growth of fungi and mould.
Mouldshield Fungicidal Eggshell Colour (Tinted)
Share...

In detail

Dulux Trade Mouldshield Quick Drying Eggshell is a high opacity, washable mould inhibiting finish for interior walls and ceilings. Contains a fungicide within the film coating to prevent the growth of fungi and mould. 

This product has a low-odour, is water thinnable and recoatable in 4-6 hours. Suitable for application by brush or roller, with coverage up to 16sq/m per litre. 

Size
5L 
Application Methods
Brush, Roller
Coverage
Up to 16sq/m per litre 
VOC level
Low 
Thinning
Water 
Touch dry
1-4 hours 
Recoatable
4-8 hours 
Suitable for...
Interior use 
Scrubbability
Scrubbable 
Finish
Eggshell 
Cleanup
Water & Detergent 
Base
Water-Based 

Available colours

Dulux Trade Mouldshield Fungicidal Eggshell Colour (Tinted) is available in 6169 colours from the Dulux Trade Colour Cards.

    Browse colours

    Always ask your client to try their colour choice on the wall first. Colour cards and emulsion sample pots are available at your local Brewers or at designerpaint.com

    Additional information

    Surface Preparation

    To get the best results, ensure surfaces to be painted are sound, clean and dry and free from all defective or poorly adhering material such as dirt, grease or wax. Remove and treat any mould, algae, lichen or mould.

    Thoroughly rub down previously painted surfaces, using ‘wet flatting’ methods where possible, and then wipe off with a damp, lint free cloth.

    Special precaution should be taken during surface preparation of pre- 1960’s paint surfaces over wood and metal as they may contain harmful lead.

    Avoid the inhalation of dust. Wear a suitable face mask if dry sanding. Treat knots with an appropriate knotting solution. New or bare surfaces should be primed with an appropriate primer.

    Application

    Apply with a brush or roller only. For Health & Safety reasons relating to all fungicidal paints, spray application is not recommended.

    Do not use when the temperature is below 10ºC.

    Cleaning up

    After use, remove as much product as possible from equipment before cleaning with water.