- Application Methods
- Airless Spray, Brush, HVLP Spray, Roller
- Up to 12sq/m per litre
- VOC level
- Do not thin
- Touch dry
- 1-4 hours
- 1-4 hours
- Pure Brilliant White
- Water & Detergent
* Colours on screen may vary from actual paint
To get the best results, ensure surfaces to be painted are sound, clean and dry (new surfaces particularly must be fully dry). Surfaces must be thoroughly cleaned to remove all dirt, grease and any surface contamination that could affect the adhesion of subsequent coatings.
Remove all blistering, poorly adhering or otherwise defective coatings. Special precautions should be taken during surface preparation of pre-1960’s paint surfaces over wood and metal as they may contain harmful lead.
Application is by brush, roller or airless sprayer.
As with all water based paints, do not apply at temperatures below 8ºC (as recommended by British Standard BS 6150).
Sealing new or bare surfaces: Application may be thinned for new work up to 1 part clean water to 5 parts paint. However, flame upgrade properties will not be achieved without further application of 2 coats at a wet film thickness of 85 microns.
Normal use: Do not thin this product
Airless spray application: Do not thin this product
After use, remove as much product as possible from equipment before cleaning with water.