Dulux Trade
Pyroshield Durable Matt 5L

£160.62 inc. VAT
Please choose a colour before adding to your basket
Trade customer? - log in to get your prices. close

Tell us where you are to check stock for Click & Collect:

Quick drying, flame retardant, highly durable smooth finish for interior use.
Pyroshield Durable Matt

In detail

Dulux Trade Pyroshield Durable Matt is a low VOC content matt finish. A wipeable product which can not be thinned and is applied by brush, roller or airless spray. Suitable for interior use. Touch dry in 2-4 hours and recoatable after 2-4 hours.

Important notice regarding supply – this product is for specification use only and a project reference number will be required prior to purchase. Please ask in-store for further details.

Application Methods
Airless Spray, Brush, HVLP Spray, Roller
Up to 12sq/m per litre 
VOC level
Do not thin 
Touch dry
1-4 hours 
1-4 hours 
Pure Brilliant White 
Water & Detergent 

* Colours on screen may vary from actual paint

Available colours

Dulux Trade Pyroshield Durable Matt is available in 5194 colours from the Dulux Trade Colour Cards.

    Browse colours

    Always ask your client to try their colour choice on the wall first. Colour cards and emulsion sample pots are available at your local Brewers or at designerpaint.com

    Additional information

    Surface Preparation

    To get the best results, ensure surfaces to be painted are sound, clean and dry (new surfaces particularly must be fully dry). Surfaces must be thoroughly cleaned to remove all dirt, grease and any surface contamination that could affect the adhesion of subsequent coatings.

    Remove all blistering, poorly adhering or otherwise defective coatings. Special precautions should be taken during surface preparation of pre-1960’s paint surfaces over wood and metal as they may contain harmful lead.


    Application is by brush, roller or airless sprayer.

    As with all water based paints, do not apply at temperatures below 8ºC (as recommended by British Standard BS 6150).

    Sealing new or bare surfaces: Application may be thinned for new work up to 1 part clean water to 5 parts paint. However, flame upgrade properties will not be achieved without further application of 2 coats at a wet film thickness of 85 microns.

    Normal use: Do not thin this product

    Airless spray application: Do not thin this product

    Cleaning up

    After use, remove as much product as possible from equipment before cleaning with water.