Dulux Trade Weathershield
Exterior Quick Drying Satin (Tinted) S 3060-G10Y 2.5L

AE016950J
NCS: S 3060-G10
Store stocked line
FREE next working day delivery available
£79.52 inc. VAT
Trade customer? - log in to get your prices. close

Tell us where you are to check stock for Click & Collect:

Quick drying, tough & durable, satin finish for exterior use. 6 year all-weather protection.
Exterior Quick Drying Satin (Tinted)
Share...

In detail

Dulux Trade Weathershield Exterior Quick Drying Satin is a flexible, weather resistant topcoat for exterior woodwork. It is a water-based trim solution compared to traditional solvent-based finishes. This finish has been produced with reduced carbon and energy.  


Contains a fungicide to prevent mould growth and provides up to 6 years protection when used as part of a 3 stage system alongside Weathershield Exterior Preservative Primer+ and Weathershield Exterior Quick Drying Undercoat.  

Application is by brush with coverage up to 20sq/m per litre. Touch dry in 2 hours and recoatable in 4 hours.

Size
2.5L 
Application Methods
Brush
Coverage
Up to 20sq/m per litre 
VOC level
Low 
Thinning
Water 
Touch dry
1-4 hours 
Recoatable
1-4 hours 
Suitable for...
Exterior use 
Scrubbability
Washable 
Lifespan
Up to 6 years 
Colour type
Tinted 
Finish
Satin 
Cleanup
Water & Detergent 
Base
Water-Based 

* Colours on screen may vary from actual paint

Available colours

Dulux Trade Weathershield Exterior Quick Drying Satin (Tinted) is available in 11196 colours from the Dulux Trade Weathershield Colour Cards.

    Browse colours

    Always ask your client to try their colour choice on the wall first. Colour cards and emulsion sample pots are available at your local Brewers or at designerpaint.com

    Additional information

    Surface Preparation

    For the best results, ensure surfaces to be painted are sound, clean and dry (new surfaces must be fully dry). Treat any areas affected by mould, lichens and algae with a suitable fungicidal wash.

    Application

    • Stir thoroughly before use.
    • Apply 1 coat of the appropriate coloured Weathershield Quick Dry Exterior Undercoat to all primed wood.
    • Apply a second coat of Weathershield Quick Dry Exterior Undercoat overall, followed by 1 coat of Weathershield Quick Dry Exterior Satin.
    • Where a strong colour change is involved, 2 coats may be required.
    • Allow a minimum of 2 hours before overcoating Weathershield Quick Dry Exterior Undercoat.
    • Brush only. Do not spray.

    Cleaning Up

    After use, remove as much paint as possible from brushes before cleaning with water. Do not use or store in extremes of temperature and protect from frost. When this paint container is empty please ask your stockist about recycling.