Dulux Trade Weathershield
Exterior Quick Drying Undercoat (Tinted) 2.5L

AE017050J
£61.80 inc. VAT
Please choose a colour before adding to your basket
Trade customer? - log in to get your prices. close

Tell us where you are to check stock for Click & Collect:

Quick drying, flexible, good coverage for exterior use on woodwork
Exterior Quick Drying Undercoat (Tinted)
Share...

In detail

Dulux Trade Weathershield Exterior Quick Drying Undercoat is a low VOC content finish that is thinned with water and applied by brush. This product is suitable for exterior use and is touch dry in 1-2 hours and recoatable after 2-4 hours. 

To get the best results, ensure surfaces to be painted are sound, clean and dry (new surfaces particularly must be fully dry) and free from all defective or poorly adhering material such as dirt, grease or wax. 

Size
2.5L 
Application Methods
Brush
Coverage
Up to 16sq/m per litre 
VOC level
Low 
Thinning
Water 
Touch dry
1-4 hours 
Recoatable
1-4 hours 
Lifespan
Up to 10 years 
Colour
Pure Brilliant White 
Cleanup
Water & Detergent 
Base
Water-Based 

* Colours on screen may vary from actual paint

Available colours

Dulux Trade Weathershield Exterior Quick Drying Undercoat (Tinted) is available in 43 colours from the Dulux Trade Weathershield Colour Cards.

    Browse colours

     
     
     
     
     
     
     
     
     
     
     
     

    Always ask your client to try their colour choice on the wall first. Colour cards and emulsion sample pots are available at your local Brewers or at designerpaint.com

    Additional information

    Surface Preparation
    For the best results, ensure surfaces to be painted are sound, clean and dry (new surfaces must be fully dry). Treat any areas affected by mould, lichens and algae with a suitable fungicidal wash.

    System Information
    STIR THOROUGHLY BEFORE USE. Treat any knots in wood with an appropriate knotting solution. New or bare surfaces: Prime all bare wood with 2 coats of Weathershield Preservative Primer +(BP) followed by 2 coats of Weathershield Quick Dry Exterior Undercoat. Previously painted surfaces: 1 coat of Weathershield Quick Dry Exterior Undercoat. Finishing: Allow to dry for a minimum of 2 hours between coats, then apply the appropriate Weathershield topcoat. 

    Application
    Brush only. Do not spray.

    Cleaning Up
    After use, remove as much paint as possible from brushes before cleaning with water. Do not use or store in extremes of temperature and protect from frost. When this paint container is empty please ask your stockist about recycling.