Dulux Trade Weathershield All Seasons Masonry is a high VOC content matt finish.
Applied by brush or roller, it is suitable for exterior use.
Touch dry in 30 minutes and recoatable after 1-2 hours.
All Seasons Masonry is high performance exterior coating for use in low temperatures or where extreme weathering is likely to occur.
Masonry paints are mould and fungal resistant.
Can be applied to sound, previously coated render without thinning.
On sound new render, thin the first coat with water to manufacturers recommendations.
On chalky, friable surfaces, this product is self-stabilising.
- Application Methods
- Brush, Roller
- Up to 16sq/m per litre
- VOC level
- Not Recommended
- Touch dry
- Up to 1 hour
- 1-4 hours
- Up to 15 years
- Pure Brilliant White
- Brush cleaner or White spirit
* Colours on screen may vary from actual paint
To get the best results, ensure surfaces to be painted are sound, clean and dry (new surfaces must be fully dry). Treat any areas affected by mould, lichens and algae with a suitable fungicidal wash.
STIR THOROUGHLY BEFORE USE. Seal new or bare surfaces with a thinned first coat of Weathershield All Seasons Smooth Masonry (up to 1 part white spirit to 10 parts paint). The normal finishing process is 2 full coats of Weathershield All Seasons Smooth Masonry, but on previously painted surfaces in good condition, where similar colours are used, 1 coat may be sufficient.
Brush or roller. Do not spray. For Health and Safety reasons related to all solvent-based paints, spray application is not recommended.
After use, remove as much paint as possible from brushes before cleaning with brush cleaner. Do not use or store in extremes of temperature. When this paint container is empty please ask your stockist about recycling.