Once Satinwood Pure Brilliant White 2.5L
In detail
Dulux Once Satinwood is a one coat Satin finish for all interior wood and metal surfaces.
It is easy to apply and does not require an undercoat where the surface is primed or previously coated.
On new or bare wood and metal, please use an appropriate primer and allow to dry before overcoating with Dulux Once Satinwood.
Application of a thick even coat is required. Failure to do so may require a second coat to be applied.
Solvent-based product which is touch dry in 4 hours and re-coatable in 16-24 hours.
- Size
- 2.5L
- Application Methods
- Brush
- Coverage
- Up to 12sq/m per litre
- VOC level
- High
- Thinning
- Not Recommended
- Touch dry
- 1-4 hours
- Recoatable
- 12-24 hours
- Suitable for...
- Interior use
- Scrubbability
- Washable
- Colour
- Pure Brilliant White
- Colour type
- White
- Finish
- Satin
- Cleanup
- Brush cleaner or White spirit
- Base
- Solvent-Based
* Colours on screen may vary from actual paint
Data sheets
Additional information
Prepare
Scrape: remove flaking or defective paint and sand down the surface to remove any sheen. Refer to health, safety and environmental information.
Clean: make sure the surface is clean (no dirt or grease) and dry.
Seal: if a bare surface, apply the appropriate Dulux Primer. Treat any knots in wood with a suitable knotting solution. If the surface is damaged, repair using the appropriate Polycell product.
Paint
Stir: stir thoroughly before use to ensure the paint is completely mixed
Apply: apply using a clean, good quality brush. Apply a thick even coat of paint taking care not to spread it too far. Failure to do so may require a second coat, particularly when painting over a darker colour with a lighter topcoat. Leave a minimum of 16 hours between coats.
Dry: leave for 16 hours to dry. Newly painted doors and windows should not be closed.
Clean
Clean: for best results, scrape off excess paint from the brush and clean with Polycell Brush Cleaner.
Store: store paint in dry conditions and protect from extreme temperatures.
Recycle: don't waste unwanted paint! Leftover product may be taken to a Community RePaint collection point. Make a small difference to someone else at communityrepaintorg.uk
