A stain blocking primer for sealing back stains and powdery surfaces.
Dulux Trade Stain Block Primer is a low VOC water-based primer and for use on interior walls and ceilings. This primer seals the surface preventing bleeding into the finishing coat. Recoatable in 6-8 hours with coverage up to 14sq/m/L.
Effective against stains such as; pen, crayon, coffee, water marks, grease, nicotine and smoke damage. Can also be used to bind back chalky, friable and powdery surfaces such as distemper and limewash.
- Application Methods
- Brush, Roller
- Up to 14sq/m per litre
- VOC level
- Do not thin
- 4-8 hours
- Suitable for...
- Interior use
- Water & Detergent
STAIN BLOCK PRIMER
A water-based primer suitable for use on interior walls and ceilings. It is formulated to prevent the migration of stains through the finished paint film and also to seal and bind dry, friable and powdery interior surfaces such as plaster, brick and distemper. It is the effective treatment for stains caused by: water-based and solvent-based inks, crayon, biro, coffee, grease, scuff marks, water and nicotine.
To get the best results, ensure surfaces to be painted are sound, clean and dry (new surfaces particularly must be fully dry).
Application: Brush or short pile roller. Do not spray.
STIR THOROUGHLY BEFORE USE. After suitable surface application, apply 1 coat of Dulux Trade Stain Block Primer to all bare or stained surfaces and allow to dry. Two coats will be necessary for difficult stains. Finish with an appropriate Dulux Trade paint system.
After use, remove as much paint as possible from equipment before cleaning with water. Do not use or store in extremes of temperature and protect from frost. When this paint container is empty please ask your stockist about recycling.