Johnstones Trade
Aqua Satin Colour (Tinted) 5L

AF033505F
FREE next working day delivery available
£111.73 inc. VAT
Please choose a colour before adding to your basket
Trade customer? - log in to get your prices. close

Tell us where you are to check stock for Click & Collect:

Quick drying, satin finish for interior and exterior use on wood and metal. Stays whiter for longer.
Aqua Satin Colour (Tinted)
Share...

In detail

Johnstone's Trade Aqua Satin is a low VOC content mid sheen finish.  A washable product which is thinned with water and is applied by brush.  

  • Suitable for interior and exterior use. 
  • Touch dry in 1-2 hours and recoatable after 4-6 hours.  
Water based satin is a tough, durable mid sheen finish for wood and metal, which is non-yellowing and provides good resistance to knocking and scuffing. 

Can be applied over most previously painted surfaces without an undercoat. On new surfaces apply over the top of a suitable primer.

Size
5L 
Application Methods
Brush
Coverage
Up to 12sq/m per litre 
VOC level
Low 
Thinning
Water 
Touch dry
1-4 hours 
Recoatable
4-8 hours 
Suitable for...
Interior and exterior use 
Scrubbability
Washable 
Colour type
Tinted 
Finish
Satin 
Cleanup
Water & Detergent 
Base
Water 

* Colours on screen may vary from actual paint

Available colours

Johnstones Trade Aqua Satin Colour (Tinted) is available in 5942 colours from the Johnstones Trade Colour Cards.

    Browse colours

    Always ask your client to try their colour choice on the wall first. Colour cards and emulsion sample pots are available at your local Brewers or at designerpaint.com

    Additional information

    Surface Preparation

    All surfaces to be painted should be clean, dry and free from all loose and flaking material. Prime bare wood surfaces with Johnstone’s Aqua Water Based Undercoat. Prime all other bare surfaces with an appropriate primer and rub down previously painted surfaces with fine waterproof abrasive paper and rinse thoroughly.

    Avoid the inhalation of dust. Wear a suitable face mask if dry sanding.

    Special precautions should be taken during surface preparation of pre-1960’s painted surfaces over wood and metal as they may contain harmful lead.

    Application

    • Stir well.
    • Easy to apply by brush.
    • Avoid overspreading.
    • Do not apply in temperatures below 10˚C or externally when rain is imminent.
    • For best results use a good quality synthetic brush.

    Clearing up

    Remove as much product as possible from application equipment before cleaning. Replace lid firmly.

    Clean equipment immediately after use with warm soapy water and rinse thoroughly.

    Do not empty product into drains or watercourse.