Covaplus Vinyl Matt Colour S 5540-B30G 5L
AF035550F
NCS: S5540-B30G
NCS: S5540-B30G
Store stocked line
FREE next working day delivery available
Trade customer? - log in to get your prices. close
Trade Deals promotion
High quality, excellent opacity, matt finish for interior walls & ceilings. Providing a longer working time to reduce flashing and patchy finishes.
Share...
In detail
Johnstone's Trade Covaplus Vinyl Matt is a high opacity emulsion for interior use on plaster surfaces. Ideal for walls and ceilings where it dries to a wipeable matt finish.
Wipeable products are suitable for light traffic areas where occasional cleaning is required.
Can be applied to coated plaster surfaces without thinning. On new plaster, thin the first coat with water to manufacturers recommendations.
- Easy to apply with excellent coverage.
- Low-odour, low in VOCs and environmentally friendly.
- Application is by brush, roller or spray with coverage up to 17sq/m per litre.
- Touch dry between 1-2 hours and recoatable between 2-4 hours.
- Size
- 5L
- Application Methods
- Airless Spray, Brush, HVLP Spray, Roller
- Coverage
- Up to 14sq/m per litre
- VOC level
- Eco
- Thinning
- Water
- Touch dry
- 1-4 hours
- Recoatable
- 1-4 hours
- Suitable for...
- Interior use
- Scrubbability
- Wipeable
- Colour type
- Tinted
- Finish
- Matt
- Cleanup
- Water & Detergent
- Base
- Water
* Colours on screen may vary from actual paint
Available colours
Johnstones Trade Covaplus Vinyl Matt Colour is available in 4450 colours from the Johnstones Trade Colour Cards.
Browse colours
Always ask your client to try their colour choice on the wall first. Colour cards and emulsion sample pots are available at your local Brewers or at designerpaint.com
Data sheets
Additional information
Preparation
All surfaces to be painted should be clean, dry and free from loose and flaking material. Prime bare surfaces with the appropriate Johnstone's Primer. Rub down previously gloss painted surfaces with fine waterproof abrasive paper and rinse thoroughly. Avoid the inhalation of dust. Wear a suitable face mask if dry sanding.
Application
Stir well. Easy to apply by brush or roller. Also suitable for application by spray. Seal absorbent surfaces with a coat of Covaplus thinned up to 10% with clean water. If more than one can of a colour is to be used in the same area, intermix before use. Do not apply in temperatures below 10°C.
Coverage
Johnstone's Covaplus will cover approximately 12-14 square metres per litre depending on the nature and porosity of the surface being painted.
Drying Time
Touch dry in 1-2 hours.
Recoatable after 2-4 hours.
After Use
Remove as much product as possible from application equipment before cleaning. Replace lid firmly. Clean equipment immediately after use with warm soapy water and rinse thoroughly. Some local authorities have special facilities for the disposal of waste coatings. Do not empty product into drains or watercourses.
General Information
Thinner: Clean water. To avoid the risk of spillage, always store and transport in a secure upright position.
Lift with care - gross weight does not exceed 16 kilograms, Do not use empty container for storing food.
PROTECT FROM FROST.