Johnstones Trade
Perfect Matt (Tinted) Dusk Puddle 10L

£131.99 inc. VAT
Trade customer? - log in to get your prices. close

Tell us where you are to check stock for Click & Collect:

Effortless spot repair and achieves a flawless matt finish.

In detail

Johnstone’s Trade Perfect Matt is an innovative matt wall paint that eliminates the impact of visible application. Smooth Layer technology creates a flawless finish with ease and in any colour. 
  • Eliminates visible application marks
  • Flawless flat matt finish
  • Effortless spot repair
  • Class 1 scrub resistance
Water-based matt which can be used on blockwork/brickwork, cement render, plaster, concrete, primed substrate and plasterboard. Suitable for interior use, re-coatable in 2-4 hours and touch dry in 1-2 hours.

Application Methods
Brush, Roller, Spray
Up to 13sq/m per litre 
VOC level
Touch dry
1-4 hours 
1-4 hours 
Suitable for...
Interior use 
Colour type
Water & Detergent 

* Colours on screen may vary from actual paint

Available colours

Johnstones Trade Perfect Matt (Tinted) is available in 8552 colours from the Johnstones Trade Colour Cards.

    Browse colours

    Always ask your client to try their colour choice on the wall first. Colour cards and emulsion sample pots are available at your local Brewers or at

    Additional information


    All surfaces to be painted should be clean, dry and free from loose and flaking material. Prime bare surfaces with the appropriate Johnstone's Primer. Rub down previously glossed painted surface and rinse thoroughly. Avoid inhalation of dust. Wear a suitable face mask if dry sanding.


    • Ensure good ventilation during application and drying.

    • Stir well.

    • Easy to apply by brush or roller. Also suitable for application by spray.

    • Do not breathe spray, wear respiratory protection.

    • Seal absorbent surfaces with a coat of Johnstone's Trade Perfect Matt thinned up to 5-10% with clean water.

    • If more than one of a colour is to be used in the same area intermix before use.

    • Do not apply in temperature below 8°C. Use only the original paint for spot repair.

    After use

    Remove as much product as possible from application equipment before cleaning. Replace lid firmly. Clean equipment immediately after use with warm soapy water and rinse thoroughly. Some local authorities have special facilities for the disposable of waste coatings. Do not empty product into drains or watercourses. Do not use empty container for storing food.