- Recoatable in 4-6 hours with coverage up to 11m²/L.
- Suitable for application by brush, roller or spray.
- Application Methods
- Airless Spray, Brush, HVLP Spray, Roller
- Up to 11sq/m per litre
- VOC level
- Touch dry
- 1-4 hours
- 1-4 hours
- Suitable for...
- Interior use
- Brilliant White
- Water & Detergent
Johnstones Trade Anti Mould Acrylic Colour (Tinted) is available in 1995 colours from the Johnstones Trade Colour Cards.
Always ask your client to try their colour choice on the wall first. Colour cards and emulsion sample pots are available at your local Brewers or at designerpaint.com
All surfaces to be painted should be clean, dry and free from loose and flaking material. Rub down previously gloss painted surfaces with fine waterproof abrasive paper and rinse thoroughly. Avoid the inhalation of dust. Wear a suitable face mask when dry sanding. Surfaces contaminated with mould growth should be treated with Johnstone's Sterilisation Wash as directed.
Stir well before use. Suitable for application by brush or roller. Also suitable for application by spray. Seal absorbent surfaces with a coat of Johnstone's Anti-Mould Acrylic thinned with up to 10% clean water. Do not apply in temperatures below 10°C or externally when rain is imminent.
Johnstone's Anti-Mould Acrylic will cover approximately 9-11 square metres per litre depending on the nature and porosity of the surface being painted.
Touch dry in 1-2 hours. Recoatable after 4-6 hours.
Remove as much product as possible from application equipment before cleaning. Replace lid firmly. Clean equipment immediately after use with warm soapy water and rinse thoroughly. Some local authorities have special facilities for the disposal of waste coatings. Do not empty product into drains or watercourses.
To avoid the risk of spillage, always store and transport in a secure upright position.
Lift with care - gross weight does not exceed 8 kilograms.
Do not use empty container for storing food.