Anti Mould Acrylic Colour (Tinted) Lime Swirl 5L
Call to check stock at your local Brewers
In detail
Johnstone's Trade Anti-Mould Acrylic is a durable, water-based, matt finish for interior walls and ceilings.
- Recoatable in 4-6 hours with coverage up to 11m²/L.
- Suitable for application by brush, roller or spray.
- Size
- 5L
- Application Methods
- Airless Spray, Brush, HVLP Spray, Roller
- Coverage
- Up to 11sq/m per litre
- VOC level
- Low
- Thinning
- Water
- Touch dry
- 1-4 hours
- Recoatable
- 1-4 hours
- Suitable for...
- Interior use
- Scrubbability
- Washable
- Colour
- Brilliant White
- Finish
- Matt
- Cleanup
- Water & Detergent
- Base
- Water
Available colours
Johnstones Trade Anti Mould Acrylic Colour (Tinted) is available in 2019 colours from the Johnstones Trade Colour Cards.
Browse colours
Always ask your client to try their colour choice on the wall first. Colour cards and emulsion sample pots are available at your local Brewers or at designerpaint.com
Data sheets
Additional information
Preparation
All surfaces to be painted should be clean, dry and free from loose and flaking material. Rub down previously gloss painted surfaces with fine waterproof abrasive paper and rinse thoroughly. Avoid the inhalation of dust. Wear a suitable face mask when dry sanding. Surfaces contaminated with mould growth should be treated with Johnstone's Sterilisation Wash as directed.
Application
Stir well before use. Suitable for application by brush or roller. Also suitable for application by spray. Seal absorbent surfaces with a coat of Johnstone's Anti-Mould Acrylic thinned with up to 10% clean water. Do not apply in temperatures below 10°C or externally when rain is imminent.
Coverage
Johnstone's Anti-Mould Acrylic will cover approximately 9-11 square metres per litre depending on the nature and porosity of the surface being painted.
Drying Time
Touch dry in 1-2 hours. Recoatable after 4-6 hours.
After Use
Remove as much product as possible from application equipment before cleaning. Replace lid firmly. Clean equipment immediately after use with warm soapy water and rinse thoroughly. Some local authorities have special facilities for the disposal of waste coatings. Do not empty product into drains or watercourses.
General Information
Cleaner: Water.
To avoid the risk of spillage, always store and transport in a secure upright position.
Lift with care - gross weight does not exceed 8 kilograms.
Do not use empty container for storing food.
