Johnstones Trade
Flortred (Ready Mixed) Tile Red 5L

AF12501015F
Resistant to mild chemicals, water, oil and grease, semi gloss finish for interior use. Suitable for light to medium traffic areas.
Flortred (Ready Mixed)
Share...

In detail

Johnstone's Flortred is a semi-gloss coating which is resistant to water, oil, mild chemicals and grease. Solvent-based product which is suitable for use on steel, concrete and wooden floors in light to medium traffic areas. Anti-slip additives can be added if needed to improve the slip resistance.

This product is suitable for interior use with a recoat time of 16-24 hours and covers up to 12sqm/l. Ideal for use on ramps, steps and walkways in light industrial factories or warehouses.

Size
5L 
Application Methods
Brush
Coverage
Up to 12sq/m per litre 
VOC level
High 
Thinning
TC2 Thinner and Cleaner 
Recoatable
12-24 hours 
Suitable for...
Interior use 
Scrubbability
Washable 
Colour
Tile Red 
Colour type
Ready Mixed 
Finish
Satin 
Cleanup
TC2 Thinner and Cleaner 
Base
Solvent-Based 

Available colours

Johnstones Trade Flortred (Ready Mixed) is available in 11 colours from the Johnstones Trade Colour Cards.

    Browse colours

     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     

    Always ask your client to try their colour choice on the wall first. Colour cards and emulsion sample pots are available at your local Brewers or at designerpaint.com

    Additional information

    Preparation

    All surfaces to be painted should be clean, dry and free from dust, laitance, loose and flaking material. New concrete or cement should be allowed to mature for several months before painting. Very dense smooth concrete surfaces (such as power floated concrete) normally require to be acid etched before painting in order to promote satisfactory adhesion.

    Application

    • Stir well before use.
    • Apply by brush or roller which should be fully loaded for best results.
    • Apply paint evenly and avoid overspreading.
    • To ease application, the first coat may be thinned with up to 5% by volume of TC2 Thinner & Cleaner.
    • Allow to dry overnight before applying a second coat if required.
    • If more than one can of a colour is to be used in the same area, intermix before use.

    Coverage

    Johnstone's Flortred will cover approximately 11 square metres per litre depending on the nature and porosity of the surface being painted.

    Drying Time

    Recoatable after 16-24 hours under normal conditions. The coating is fully cured in 7 days.