Fired Earth
Matt Emulsion (Ready Mixed) Canvas 5L

AL50095F
FREE next working day delivery available
£82.00 inc. VAT
Trade customer? - log in to get your prices. close

Tell us where you are to check stock for Click & Collect:

Easy to apply, quick drying, high opacity, chalky, matt finish for interior use. A soft and wipeable emulsion.
Matt Emulsion (Ready Mixed)
Share...

In detail

Fired Earth Matt Emulsion is a low VOC content matt finish. A wipeable product which is thinned with water and is applied by brush, roller, paint pad or airless spray. 

Suitable for interior use. It is touch dry in 1-2 hours and recoatable after 4 hours. 

Matt emulsion is a decorative coating providing a flat finish for use on walls and ceilings. Wipeable products are suitable for light traffic areas where occasional cleaning is required. Can be applied to coated plaster surfaces without thinning. On new plaster, thin the first coat with water to manufacturers recommendations.

Size
5L 
Application Methods
Airless Spray, Brush, Paint Pad, Roller
Coverage
Up to 13sq/m per litre 
VOC level
Low 
Thinning
Water 
Touch dry
1-4 hours 
Recoatable
1-4 hours 
Scrubbability
Wipeable 
Colour
Canvas 
Colour type
Ready mixed 
Finish
Matt 
Cleanup
Water & Detergent 
Base
Water 

* Colours on screen may vary from actual paint

Available colours

Fired Earth Matt Emulsion (Ready Mixed) is available in 102 colours from the Fired Earth Colour Cards.

    Browse colours

    Always ask your client to try their colour choice on the wall first. Colour cards and emulsion sample pots are available at your local Brewers or at designerpaint.com

    Additional information

    Surface Preparation

    Surfaces must be clean, dry and free from loose and flaking material, including dirt, grease etc. Repairs should be carried out prior to painting. Areas contaminated with fungal or algal growth should be treated with a proprietary fungicidal agent or with 25% household bleach before painting. Surfaces previously treated with oil-based paint should be lightly abraded before painting.

    Application

    • So not apply in temperatures below 5°C or excessive heat above 30°C.
    • Stir thoroughly before use.
    • Apply with a brush, roller, paint pad or airless spray.
    • Two finishing coats will normally suffice.

    Clean Up

    Upon finishing, remove as much paint as possible from the application equipment before washing with soapy water.

    Some local authorities have special facilities for the disposal of paint. Do not empty paint into drains or watercourses or dispose of where ground or surface water may be affected.