Sandtex Trade
X-treme X-posure Smooth Masonry Paint Black (Ready Mixed) 5L

AP10015F
Superior durable, highly flexible, matt finish for exterior use. Ultimate weather & climate endurance.
X-treme X-posure Smooth Masonry Paint Black (Ready Mixed)
Share...

In detail

Sandtex Trade X-treme X-Posure Smooth Masonry Paint is a durable, high performance coating for exterior walls and rendered surfaces. Highly flexible and covers hairline cracks while preventing them reappearing. Shower resistant 15 minutes after application.

Anti-carbonation properties, resist dirt and pollution, while an added fungicide prevents mould growth on the surface. BBA Approved 20 years protection.

Application is by brush, roller or spray with coverage up to 16sq/m per litre. Touch dry in 30 minutes and recoatable between 2-4 hours.

Size
5L 
Application Methods
Airless Spray, Brush, Roller
Coverage
Up to 16sq/m per litre 
VOC level
Low 
Thinning
Water 
Touch dry
1-4 hours 
Recoatable
1-4 hours 
Suitable for...
Exterior use 
Scrubbability
Washable 
Lifespan
Up to 20 years 
Colour
Black 
Colour type
Ready mixed 
Finish
Matt 
Cleanup
Water & Detergent 
Base
Water-Based 

* Colours on screen may vary from actual paint

Additional information

Based on a high performance, acrylic binder, X-treme, X-posure provides the ultimate protection against all weathers and climates. This premium water based formulation offers excellent adhesion, superior opacity and is dirt resistant, enabling protection of buildings for up to 20 years. It's durability is further enhanced through its anti carbonation properties which ensure surface protection against atmospheric pollutant attacks, which means you can expect an outstanding professional finish for the long term. X-treme X-posure is easy to apply, is shower resistant after 15 minutes, and due to its slow release technology prevents mould, algal and fungal growth.

Preparation

New surfaces usually require little preparation. Any faults in old surfaces must be rectified. Particular attention should be given to those which may lead to moisture penetration. Minor defects should be repaired with Sandtex Trade Exterior Easiplast. All surfaces must be clean, dry and free from anything that may interfere with the adhesion of the materials to be applied. Sound gloss paint: wet abrade to provide a key. Loose or flaking material: Remove by scraping and brushing back to a firm sound surface with a stiff bristle brush (not wire). Organic growth: Remove by scraping or brushing with a stiff bristle brush.

Application

  • Always intermix packs to ensure colour consistency.
  • Stir well before and during application.
  • New or porous surfaces should be treated with one coat of the product diluted up to 40% by volume with clean water.
  • Stir well before use.
  • Apply with a masonry paint brush, an exterior roller or by airless spray. It is recommended that two coats of Sandtex Trade X-treme X-posure are used to achieve maximum durability.
  • Do not apply when there is a risk of rain, frost or if the temperature will fall below 7°C during application and drying period. In low temperatures or high humidity drying times may be extended.
  • Note: If necessary Sandtex Trade X-treme X-posure may be thinned by up to 10% with clean water for airless spray application (21 thou tip 65° angle). Follow the spray manufacturer's guidelines for tip size and pressure.