Trade Contract Matt (Tinted) 10L

Store stocked line
£33.59 inc. VAT
Please choose a colour before adding to your basket
Trade customer? - log in to get your prices. close

Tell us where you are to check stock for Click & Collect:

Good opacity, low odour matt finish for interior walls and ceilings.

In detail

Brewers Trade Contract Matt is a water-based, low odour finish for interior walls and ceilings. 

Offers good opacity and is ideally suited to the economical redecoration of ceilings and walls and also new areas including new plaster, wallboards and other interior masonry surfaces such as brick or block work. 

Application is by brush, roller or spray with coverage up to 13sq/m per litre. Touch dry within 1-2 hours and recoatable within 3-4 hours.

Application Methods
Airless Spray, Brush, HVLP Spray, Roller
Up to 13sq/m per litre 
VOC level
Touch dry
1-4 hours 
1-4 hours 
Suitable for...
Interior use 
Colour type
Water & Detergent 

* Colours on screen may vary from actual paint

Available colours

Brewers Trade Contract Matt (Tinted) is available in 131 colours from the Brewers Colour Cards.

    Browse colours

    Always ask your client to try their colour choice on the wall first. Colour cards and emulsion sample pots are available at your local Brewers or at

    Additional information

    Brewers Contract Matt is a good opacity, low odour, water paint formulated for interior use on walls and ceilings. It provides a smooth matt finish that is ideal for application to new plaster and can also be used on wallboard and other interior masonry surfaces such as brick or block.


    All surfaces to be painted should be clean, dry and free from any loose and flaking material. Rub down glossy painted surfaces with fine waterproof abrasive paper and rinse thoroughly. Avoid the inhalation of dust. Wear a suitable face mask if dry sanding. Seal absorbent surfaces with a solution of 1 part water to 4 parts Contract Matt.


    • Stir well before use.
    • Apply paint evenly by brush or roller.
    • Avoid overspreading.
    • Ensure good ventilation during application and drying and do not apply in temperatures below 10°C or in damp conditions.

    After use

    Remove as much product as possible from application equipment before cleaning. Clean equipment immediately after use in warm soapy water and rinse thoroughly. Some local authorities have special facilities for the disposal of waste coatings. Do not empty into drains or watercourses. Replace lid firmly. Protect from frost. To avoid the risk of spillage, always store and transport in a secure upright position. Lift with care — gross weight does not exceed 16 kilograms. Do not use empty container for storing food.