Intelligent Gloss (Tinted) Bluebottle 1L
In detail
- Size
- 1L
- Application Methods
- Airless Spray, Brush, HVLP Spray, Roller
- Coverage
- Up to 14sq/m per litre
- VOC level
- Low
- Thinning
- Water
- Touch dry
- 1-4 hours
- Recoatable
- 1-4 hours
- Suitable for...
- Interior and exterior use
- Scrubbability
- Washable
- Colour type
- Tinted
- Finish
- Gloss
- Cleanup
- Water & Detergent
- Base
- Water-Based
* Colours on screen may vary from actual paint
Data sheets
Additional information
A high opacity, low odour, quick drying water based gloss finish displaying excellent adhesion to existing aged alkyd finishes. This product is highly recommended for painting radiators. kitchen & bathroom trim and walls. This product is suitable for both interior and exterior applications.
Directions of use:
- Stir thoroughly before use. Do not apply to surfaces when the ambient temperature is below 5°C
- Application by brush, roller or spray.
- Not recommended for painting previously painted lime or other natural plasters.
Surface Preparation:
New wood - For soft woods, knots should be sealed with knotting compound to prevent staining and then primed with Little Greene Traditional Oil Primer Undercoat or Little Greene Intelligent Primer Undercoat. Resinous hard woods require cleaning and treatment with Little Greene Aluminium Wood Primer (consult the relevant product data sheets for further details) prior to undercoating.
Metals - New ferrous metalwork should be hand, or mechanically cleaned, to remove any surface rust before application of Little Greene Traditional Oil Primer Undercoat. Non ferrous metals must be pre-treated or primed with an appropriate proprietary primer
Existing paint finish - Remove all loose and flaking paintwork. Degrease with a suitable detergent solution, such as sugar soap, followed by clean water rinse. Rub down thoroughly with a medium grade sand paper to provide a key and a defect free smooth surface, “feathering in” areas where paint has been removed. Make good any repairs, sand and apply primer to exposed surface as appropriate.
Plastics - For long term performance, clean & lightly sand down surfaces. Prime using a proprietary adhesion promoting plastics primer before applying the finishing coat.
New plaster walls - For plaster skim, allow at least four weeks for the plaster to thoroughly dry. Prime walls with Little Greene Wall Primer Sealer. Finish by applying two full coats of Little Greene Intelligent Gloss.
Existing plaster walls - Lightly wash any existing paint work to remove any dust or surface laitance. Apply a primer coat of Little Greene Wall Primer Sealer by thinning with a 0 to 25% (v/v) addition of clean water, depending upon the porosity of the substrate. Finish by applying at least one full coat, as required.