Leyland Trade
Acrylic Eggshell Brilliant White 5L

AV301601F
Fast drying, low VOC water based, eggshell finish for interior use.
Acrylic Eggshell Brilliant White
Share...

In detail

Leyland Trade Acrylic Eggshell is a low VOC content eggshell finish. A scrubbable product which is thinned with water and is applied by brush or roller. With a highly scrubbable finish it is an ideal product for high traffic areas such as hallways, kitchens and bathrooms. 

  • Suitable for interior use. 
  • Touch dry in 1-2 hours and recoatable after 3-4 hours. 
Being a water based eggshell it is a tough, durable mid sheen finish for interior plaster and wood. 

Can be applied over most previously painted surfaces without an undercoat. On new plaster surfaces thin the first coat with water to the manufacturers recommendations. On new wooden surfaces apply over the top of a suitable primer.

Size
5L 
Application Methods
Brush, Roller
Coverage
Up to 12sq/m per litre 
VOC level
Low 
Thinning
Water 
Touch dry
1-4 hours 
Recoatable
1-4 hours 
Suitable for...
Interior use 
Scrubbability
Scrubbable 
Colour
Brilliant White 
Colour type
White 
Finish
Eggshell 
Cleanup
Water & Detergent 
Base
Water 

* Colours on screen may vary from actual paint

Additional information

Surface Preparation

Ensure the surface to be painted is sound, clean, dry and free from grease. Remove all loose and defective paint. Rub down previously painted surfaces with fine waterproof abrasive to provide a good key. Avoid the inhalation of dust. Wear a suitable face mask if dry sanding.

Special precaution should be taken during surface preparation of pre 1960s paint surfaces over wood and metal as they may contain harmful lead.

Application

  • Stir well before use.
  • On absorbent surfaces, the first coat should be thinned when necessary to ease application, taking care not to over thin.
  • Suitable for application by brush, roller or spray.
  • Apply two full coats, allowing 3-4 hours between coats under normal conditions.
  • On certain surfaces a third coat may be necessary.
  • For spray application, thin with clean water as required, using up to approximately 0.5 litres of water to 5 litres of paint.
  • Do not apply when air or surface temperature is below 10ºC.
  • Conditions of high humidity can prolong the drying time.

Clean Up

Remove as much product as possible from the application equipment before cleaning. Clean equipment immediately after use in warm, soapy water and rinse thoroughly.

Some local authorities have special facilities for disposal of waste coatings. Do not empty product into drains or watercourses. Replace lid firmly.