Leyland Trade
Fast Drying Satin Brilliant White 2.5L

AV30173005J
Non yellowing, low odour, excellent flow, satin finish for interior and exterior use on wood and metal.
Fast Drying Satin Brilliant White
Share...

In detail

Leyland Trade Fast Drying Satin is a low VOC content satin finish. 

It is a washable product which is suitable for interior and exterior use. 

It is touch dry in and recoatable after 4 hours. 

Water based satin is a tough, durable mid sheen finish for wood and metal, which is non-yellowing and provides good resistance to knocking and scuffing.

It can be applied over most previously painted surfaces without an undercoat. On new surfaces apply over the top of a suitable primer.

Size
2.5L 
Application Methods
Brush
Coverage
Up to 12sq/m per litre 
VOC level
Low 
Thinning
Not required 
Recoatable
1-4 hours 
Scrubbability
Washable 
Colour
Brilliant White 
Colour type
White 
Finish
Satin 
Cleanup
Water & Detergent 

* Colours on screen may vary from actual paint

Additional information

Preparation
Ensure surface to be painted is sound, clean, dry and free from grease. Rub down sound previously gloss painted surfaces with fine waterproof abrasive paper to provide a key and rinse thoroughly before applying a pre-coat of Leyland Trade Fast Drying Undercoat. Avoid the inhalation of dust. Wear a suitable face mask if dry sanding, Apply Knotting Solution to knots and resinous surfaces and prime exposed wood and metal surfaces with the appropriate Leyland Primer. Special precautions should be taken during the surface preparation of pre-1960s paint surfaces over wood and metal as they may contain harmful lead.

Application
Stir well before use. Apply by brush or roller. Apply liberally and evenly for a smooth finish. Under normal conditions, allow 4 hours before applying a second coat if required. Do not apply when air or surface temperature is below 10°C or externally when rain is imminent.

Coverage
1 litre will cover approximately 12 square metres, depending on the nature and porosity of the surface. Strong or contrasting colours may require additional coats. When using more than one can of a colour in the same room, intermix before use.