Leyland Trade Super Leytex Matt is a low VOC content matt finish. A permeable product which is thinned with water and is applied by brush, roller, airless spray or HVLP spray.
- Suitable for interior use.
- Touch dry in 1-2 hours and recoatable after 2-4 hours.
Matt emulsion is a decorative coating providing a flat finish for use on walls and ceilings. On new plaster, thin the first coat with water to manufacturers recommendations.
- Application Methods
- Airless Spray, Brush, HVLP Spray, Roller
- Up to 13sq/m per litre
- VOC level
- Touch dry
- 1-4 hours
- 1-4 hours
- Brilliant White
- Colour type
- Water & Detergent
* Colours on screen may vary from actual paint
Ensure surface to be painted is sound, clean, dry and free from grease. Remove all loose and defective paint. Make good surface imperfections and cracks with Filler. Prime where required with the appropriate Leyland Primer. Rub down glossy surfaces with fine waterproof abrasive paper. Avoid the inhalation of dust. Wear a suitable face mask if dry sanding. Seal absorbent surfaces with a solution of 1 part water to 9 parts Leyland Super Leytex Matt.
Stir well before use. Do not thin, except for absorbent surfaces, or when applying by roller or spray when a small quantity of clean water may be added. Suitable for application by brush, roller or spray. Apply paint evenly by brush or roller and avoid overspreading. If required apply a second coat after 2 to 4 hours. Do not apply in temperatures below 10°C.
1 litre will cover approximately 13 square metres, depending on the nature and porosity of the surface. Strong or contrasting colours may require additional coats. When using more than one tin of a colour in the same room, intermix before use.
Remove as much product as possible from application equipment before washing. Wash equipment immediately after use In warm soapy water and rinse thoroughly.