Crown Trade
Timonox Anti-Graffiti Flame Retardant Glaze Activator 1L

BA2135005N
One coat application, high eggshell finish. Provides a flame retardant anti-graffiti coat for use over Crown Trade Timonox Vinyl Matt ONLY
Timonox Anti-Graffiti Flame Retardant Glaze Activator
Share...

In detail

A one coat application with a high eggshell finish. Provides a flame retardant anti-graffiti coat for use over Crown Trade Timonox Vinyl Matt ONLY when used with Timonox Anti-Graffiti Flame Retardent Glaze.

Under normal drying conditions surface dry in 2 hours. Allow for adequate ventilation during the drying period.

Do not apply when air or substrate temperatures are likely to fall below 8ºC, or when relative humidity is above 80% during application or drying period.

For interior use only.

Size
1L 
Application Methods
Airless Spray, Brush, Roller
VOC level
Low 
Touch dry
1-4 hours 
Suitable for...
Interior use 
Finish
Satin 

* Colours on screen may vary from actual paint

Additional information

Surface Preparation

All surfaces must be sound, clean, suitably dry and free from anything that will interfere with the adhesion of the materials to be applied. Powdery, polished plaster or dense surfaces should be primed with Crown Trade Timonox Bonding Primer thinned as per the container instructions. Porous surfaces and paper faced plasterboard should be ‘mist’ coated with Crown Trade Timonox Vinyl Matt thinned with 40% clean water.

Previously Decorated Surfaces

On extremely chalky, powdery or unstable surfaces Crown Trade Stabilising Solution should be used.

Application

Stir well before use. Ensure all application tools are clean and dry. Apply over all areas, one full coat of Timonox Anti-Graffiti Flame Retardant Glaze by brush or short pile roller.

All ‘cutting in’ should be completed during roller applications whilst the Glaze is still ‘wet’.

The spreading rate must not exceed 15m² per litre (minimum wet film thickness 67 micrometres).

Do not thin.

Clearing Up

Return any surplus material to a suitable empty container for disposal. Clean equipment with clean Epoxy Thinner immediately after use.