One Can (Tinted) 5L

£98.88 inc. VAT
Please choose a colour before adding to your basket
Trade customer? - log in to get your prices. close

Tell us where you are to check stock for Click & Collect:

'Blocks and Locks' stains, hides troublesome resinous bleeds and knots on hardwoods.
One Can (Tinted)

In detail

Bradite One Can is a single pack, low odour, quick drying, water thinned primer/finish coat with excellent stain blocking, adhesion and anti-corrosive properties.

Ideal for protecting many substrates such as interior and exterior joinery, building plastics and metal surfaces.

Can be used on the following stains: water damage, knots, smoke damage, tanin bleed, rust and nicotine stains.

Application Methods
Brush, Roller, Spray
Up to 11sq/m per litre 
VOC level
Touch dry
Up to 1 hour 
1-4 hours 
Suitable for...
Interior and Exterior use 
Colour type
Water & Detergent 

Available colours

Bradite One Can (Tinted) is available in 576 colours from the Bradite Colour Cards.

    Browse colours

    Always ask your client to try their colour choice on the wall first. Colour cards and emulsion sample pots are available at your local Brewers or at

    Additional information

    Bradite paints and coatings meet the highest quality and performance standards in the most demanding environments. To obtain satisfactory results you should ensure you know the best way to use the product. Free advice is available upon request from Bradite Paints and its distributors. General advice given below does not constitute a specification.


    Intact areas of existing coatings should, ideally, be roughened by manual or mechanical sanding. Feather back exposed areas to a sound coating edge. Cracks and pits should be filled using a suitable filler before painting. Substrate should be free of contamination, grease, oil, dust and completely dry before coating. For best results degrease using Bradite TD39 Industrial Degreaser. For full preparation and application details please see technical data sheet. Application and use should always conform with the codes of practice described in BS 6150 and BS 5493.


    • By brush, roller or spray (please refer to data sheet for spraying information)
    • Apply one or two further full coats as required.
    • Touch dry in 30 minutes, recoat 1 hour minimum with full cure after 7 days.
    • The theoretical (maximum) spreading rate is 12 square metres per litre per coat. Loss factors will apply in practice
    • Tools should be cleaned with water after use.