Bradite
AP71 Fastrac Antico Primer Blue 5L

BL04594005F
A very fast drying high build primer for steel.
AP71 Fastrac Antico Primer Blue
Share...

In detail

A very fast drying high build modified alkyd primer, pigmented with zinc phosphate, excellent protective properties against corrosion on properly prepared steel. Suitable for use as a prefab or holding primer for steel, high build can be applied up to 75-100 microns. Touch dry in 20 minutes.

Size
5L 
Application Methods
Airless Spray, Brush, HVLP Spray, Roller
Coverage
Up to 10sq/m per litre 
VOC level
High 
Thinning
Bradite TX31 or TC32 
Touch dry
Up to 1 hour 
Recoatable
1-4 hours 
Colour
Blue 
Finish
Eggshell 
Cleanup
Bradite TX31 or TC32 
Base
Solvent-Based 

Additional information

Bradite paints and coatings meet the highest quality and performance standards in the most demanding environments. To obtain satisfactory results you should ensure you know the best way to use the product. Free advice is available upon request from Bradite Paints and its distributors. General advice given below does not constitute a specification.

Preparation

Particular consideration should be paid to surface preparation, temperature and dryness of substrate. Surface should be dry, clean and to the specified standard. MIXING: All materials should be mixed before use. Two-pack materials should be completely mixed before use. Do not mix old or pre-catalysed paints with new stock. The use of a mechanical mixer is always preferred. In the case of two-pack materials, take care not to mix more than can be used before the pot-life has expired.

Application

  • Paints and coatings may require thinning to ease application on absorbent substrates or to accommodate adverse climatic conditions.
  • Do not apply coatings when the temperature of the substrate is below 3°C above dew point, to avoid surface condensation affecting the coating as it dries.
  • Be sure to follow guidance on drying times before overcoating and hand-over.