Bradite
EC88 Epoxy Coating (Tinted) 5L

BL047202F
£93.42 inc. VAT
Trade customer? - log in to get your prices. close

Tell us where you are to check stock for Click & Collect:

High performance coating for concrete and steel floors. Ideal for heavy traffic areas.
EC88 Epoxy Coating (Tinted)
Share...

In detail

Bradite EC88 is a Solvent-based, two pack epoxy coating and finish for concrete and suitably primed steel floors. 

Using a tough, hard-wearing film, it has superior resistance to heavy traffic and chemical and is suitable for water immersion, not to be used for drinking water or fish ponds.

Touch dry in 3 hours and recoatable in a minimum of 14 hours.

Size
5L 
Application Methods
Airless Spray, Brush, HVLP Spray, Roller
Coverage
Up to 11sq/m per litre 
Thinning
Bradite TE36 
Touch dry
1-4 hours 
Recoatable
12-24 hours 
Suitable for...
Interior use 
Scrubbability
Washable 
Colour
Tinted 
Finish
Semi-Gloss 
Cleanup
Bradite TE36 
Base
Solvent-Based 

Additional information

Bradite paints and coatings meet the highest quality and performance standards in the most demanding environments. To obtain satisfactory results you should ensure you know the best way to use the product. Free advice is available upon request from Bradite Paints and its distributors. General advice given below does not constitute a specification.

Preparation

Particular consideration should be paid to surface preparation, temperature and dryness of substrate. Surface should be dry, clean and to the specified standard.

Application

  • Paints and coatings may require thinning to ease application on absorbent substrates or to accommodate adverse climatic conditions.
  • Do not apply coatings when the temperature of the substrate is below 3°C above dew point, to avoid surface condensation affecting the coating as it dried.
  • Be sure to follow guidance on drying times before overcoating and hand over.