EC88 Epoxy Coating (Tinted) 5L
BL047202F
Trade customer? - log in to get your prices. close
High performance coating for concrete and steel floors. Ideal for heavy traffic areas.
Share...
In detail
Bradite EC88 is a Solvent-based, two pack epoxy coating and finish for concrete and suitably primed steel floors.
Using a tough, hard-wearing film, it has superior resistance to heavy traffic and chemical and is suitable for water immersion, not to be used for drinking water or fish ponds.
Touch dry in 3 hours and recoatable in a minimum of 14 hours.
- Size
- 5L
- Application Methods
- Airless Spray, Brush, HVLP Spray, Roller
- Coverage
- Up to 11sq/m per litre
- Thinning
- Bradite TE36
- Touch dry
- 1-4 hours
- Recoatable
- 12-24 hours
- Suitable for...
- Interior use
- Scrubbability
- Washable
- Colour
- Tinted
- Finish
- Semi-Gloss
- Cleanup
- Bradite TE36
- Base
- Solvent-Based
Additional information
Bradite paints and coatings meet the highest quality and performance standards in the most demanding environments. To obtain satisfactory results you should ensure you know the best way to use the product. Free advice is available upon request from Bradite Paints and its distributors. General advice given below does not constitute a specification.
Preparation
Particular consideration should be paid to surface preparation, temperature and dryness of substrate. Surface should be dry, clean and to the specified standard.
Application
- Paints and coatings may require thinning to ease application on absorbent substrates or to accommodate adverse climatic conditions.
- Do not apply coatings when the temperature of the substrate is below 3°C above dew point, to avoid surface condensation affecting the coating as it dried.
- Be sure to follow guidance on drying times before overcoating and hand over.
