Bedec
Aqua-Advanced Gloss Black (Ready Mixed) 2.5L

BN040110J
Quick drying, low odour, micro porous, slip resistant finish for interior use on concrete and wood.
Aqua-Advanced Gloss Black (Ready Mixed)
Share...

In detail

Bedec Aqua Advanced Gloss is a high quality, quick drying, non yellowing Acrylic / Polyurethane Enamel for interior and exterior use. 

Ensure surfaces to be painted are clean, dry and free from dust, dirt, grease and wax. Remove all loose and defective paint. On existing or shiny surfaces thoroughly rub down with abrasive paper.

Touch dry in 30 minutes and recoatable after 4 hours.  Covers up to 15sq/m per litre.

Size
2.5L 
Application Methods
Airless Spray, Brush, HVLP Spray, Roller
Coverage
Up to 15sq/m per litre 
VOC level
Low 
Thinning
Water 
Touch dry
Up to 1 hour 
Recoatable
4-8 hours 
Suitable for...
Interior and exterior use 
Scrubbability
Washable 
Colour
Black 
Colour type
Ready mixed 
Finish
Gloss 
Cleanup
Water & Detergent 
Base
Water-Based 

* Colours on screen may vary from actual paint

Additional information

Surface Preparation

Ensure the surfaces to be painted are clean dry and free from dust, dirt, grease and wax. Remove all loose and defective paint. Algal and fungal growths should be removed and treated with a fungicidal wash.

Smooth glossy surfaces should be lightly abraded to provide a key.

Application

Apply by brush, roller, conventional H.V.L.P or airless spray. Stir well and check colour before use. Do not apply at air or surface temperatures below 8°C or when likely to rain before the paint has fully dried.

On sealed surfaces apply two to three coats, allowing each coat to dry thoroughly. Do not over spread.

Clearing Up

Clean up immediately after use with warm soapy water. Remove as much product as possible prior to cleaning.