Bedec
High Obliterating Matt Brilliant White 5L

BN040705F
Quick drying, high build, high obliterating, matt finish suitable for interior use on walls and ceilings.
High Obliterating Matt Brilliant White
Share...

In detail

Bedec High Obliterating Matt is a low VOC content matt finish. A washable product which is thinned with water and is applied by brush, roller, airless spray or HVLP Spray. 

Suitable for exterior use. Touch dry in 2 hours and recoatable after 4 hours. 

Approximately 10-12 sq metres/litre per coat when applied by brush or roller depending on the texture and porosity of the substrate.

Size
5L 
Application Methods
Airless Spray, Brush, HVLP Spray, Roller
Coverage
Up to 10sq/m per litre 
VOC level
Low 
Thinning
Water 
Touch dry
1-4 hours 
Recoatable
1-4 hours 
Suitable for...
Interior use 
Scrubbability
Wipeable 
Colour
Brilliant White 
Colour type
White 
Finish
Matt 
Cleanup
Water & Detergent 
Base
Water-Based 

* Colours on screen may vary from actual paint

Additional information

Surface Preparation

Ensure the surfaces to be painted are clean dry and free from dust, dirt, grease and wax. Remove all loose and defective paint. Algal and fungal growths should be removed and treated with a fungicidal wash.

Smooth glossy surfaces should be lightly abraded to provide a key.

On unpainted cement, render, plaster, brickwork or any porous substrate the first coat should be thinned with 20-30% clean water. New plaster and cement should be allowed to dry thoroughly before application.

Application

Apply by brush, roller, conventional H.V.L.P or airless spray. Stir well and check colour before use. Do not apply at air or surface temperatures below 8°C.

On sealed surfaces apply two to three coats, allowing each coat to dry thoroughly. Do not over spread.

Clearing Up

Clean up immediately after use with warm soapy water. Remove as much product as possible prior to cleaning.