Bedec
Barn Paint Woodstain Semi Gloss (Ready Mixed) 20L

BN041605C
Durable and tough product which is also a flexible micro-porous protective coating, with excellent colour retention.
Barn Paint Woodstain Semi Gloss (Ready Mixed)
Share...

In detail

Bedec Barn Paint can be applied to previously painted surfaces, even those coated with tar varnish, weathered bitumen or creosote, provided there are no loose powdery deposits. Durable and tough product which is also a flexible micro-porous protective coating, with excellent colour retention.

Two or three coats of this product can be applied in one day, especially in the summer months. Bedec Barn Paint is suitable for a variety of tasks and recommended for use on: fences, gates, cladding (wood, metal and cement fibre), farm equipment, tanks, gutters, drainpipes and many more. This product is also suitable for weathered substrates such as galvanising and plastisol cladding.

Size
20L 
Application Methods
Brush, Roller
Coverage
Up to 15sq/m per litre 
VOC level
Low 
Thinning
Water 
Touch dry
1-4 hours 
Recoatable
1-4 hours 
Suitable for...
Exterior use 
Scrubbability
Washable 
Colour
Dark Oak 
Colour type
Ready Mixed 
Finish
Satin 
Cleanup
Water & Detergent 
Base
Water-Based 

Available colours

Bedec Barn Paint Woodstain Semi Gloss (Ready Mixed) is available in 4 colours from the Bedec Colour Cards.

    Browse colours

     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     

    Always ask your client to try their colour choice on the wall first. Colour cards and emulsion sample pots are available at your local Brewers or at designerpaint.com

    Additional information

    Surface Preparation

    Ensure the surfaces to be painted are clean dry and free from dust, dirt grease and wax. Remove all loose and defective paint. Algal, mould and fungal growths should be removed and treated with a fungicidal wash.

    Smooth glossy surfaces should be lightly abraded to provide a key.

    On untreated weathered wood, new wood, cement, render, plaster, brick work or any porous substrate. The first coat should be thinned with 30% clean water.

    Application

    Apply by brush, roller, conventional H.V.L.P or airless spray. Stir well and check colour before use. Do not apply at air or surface temperatures below 8°C or when likely to rain before the paint has fully dried.

    On sealed surfaces apply two to three coats, allowing each coat to dry thoroughly. Do not over spread.

    Clearing Up

    Clean up immediately after use with warm soapy water. Remove as much product as possible prior to cleaning.