- Application Methods
- Airless Spray, Brush, HVLP Spray, Roller
- Up to 15sq/m per litre
- VOC level
- Touch dry
- 1-4 hours
- 1-4 hours
- Water & Detergent
* Colours on screen may vary from actual paint
Bedec MSP Soft Satin (Tinted) is available in 37 colours from the Bedec Colour Cards.
Always ask your client to try their colour choice on the wall first. Colour cards and emulsion sample pots are available at your local Brewers or at designerpaint.com
Ensure the surfaces to be painted are clean dry and free from dust, dirt grease and wax. Remove all loose and defective paint. Algal, mould and fungal growths should be removed and treated with a fungicidal wash.
Smooth glossy surfaces should be lightly abraded to provide a key.
On untreated weathered wood, new wood, cement, render, plaster, brick work or any porous substrate. The first coat should be thinned with 30% clean water.
Apply by brush, roller, conventional H.V.L.P or airless spray. Stir well and check colour before use. Do not apply at air or surface temperatures below 8°C or when likely to rain before the paint has fully dried.
On sealed surfaces apply two to three coats, allowing each coat to dry thoroughly. Do not over spread.
Clean up immediately after use with warm soapy water. Remove as much product as possible prior to cleaning.