Bedec
MSP Soft Matt (Ready Mixed) 2.5L

BN043010J
Long lasting, flexible finish for interior and exterior use providing excellent durability.
MSP Soft Matt (Ready Mixed)
Share...

In detail

Bedec MSP is a combined primer, undercoat and topcoat, suitable for both interior and exterior use. It dries to a microporous, breathable finish, which is resistant to flaking and cracking. 

The water-based formulation is low odour, low in VOCs and environmentally friendly. 

Suitable for use on wood, MDF, metals, plastics, tiles, masonry, plaster, UPVC, galvanised steel, aluminium, copper and radiators. 

Application is by brush, roller or spray with coverage is up to 15sq/m per litre. Recoatable in 4 hours.

Size
2.5L 
Application Methods
Airless Spray, Brush, HVLP Spray, Roller
Coverage
Up to 15sq/m per litre 
VOC level
Medium 
Thinning
Water 
Touch dry
1-4 hours 
Recoatable
1-4 hours 
Scrubbability
Washable 
Colour
Magnolia 
Finish
Matt 
Cleanup
Water & Detergent 
Base
Water 

* Colours on screen may vary from actual paint

Available colours

Bedec MSP Soft Matt (Ready Mixed) is available in 6 colours from the Bedec Colour Cards.

    Browse colours

     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     

    Always ask your client to try their colour choice on the wall first. Colour cards and emulsion sample pots are available at your local Brewers or at designerpaint.com

    Additional information

    Surface Preparation

    Ensure the surfaces to be painted are clean dry and free from dust, dirt grease and wax. Remove all loose and defective paint. Algal, mould and fungal growths should be removed and treated with a fungicidal wash.

    Smooth glossy surfaces should be lightly abraded to provide a key.

    On untreated weathered wood, new wood, cement, render, plaster, brick work or any porous substrate. The first coat should be thinned with 30% clean water.

    Application

    Apply by brush, roller, conventional H.V.L.P or airless spray. Stir well and check colour before use. Do not apply at air or surface temperatures below 8°C or when likely to rain before the paint has fully dried.

    On sealed surfaces apply two to three coats, allowing each coat to dry thoroughly. Do not over spread.

    Clearing Up

    Clean up immediately after use with warm soapy water. Remove as much product as possible prior to cleaning.