Emulsion Glaze 1L
BN04430105N
Call to check stock at your local Brewers
Non-toxic, environmentally freindly paint effect.
Share...
In detail
Bedec Emulsion Glaze is a non-yellowing, water-based product which is suitable for use when achieving broken colour effects when coloured with water based emulsion or vinyl paints.
Surfaces should be clean and dry. Lightly abrade smooth surfaces to improve adhesion.
Leaving overnight is advised for touch dry, full cure in 7 days.
- Size
- 1L
- Application Methods
- Brush, Roller
- Coverage
- Up to 18sq/m per litre
- VOC level
- Low
- Thinning
- Water
- Touch dry
- 24-48 hours
- Cleanup
- Water & Detergent
- Base
- Water-Based
* Colours on screen may vary from actual paint
Additional information
A non yellowing, water based untinted glaze for achieving broken colour effects when coloured with water based Emulsion or Vinyl paints.
Application
- Surfaces should be clean and dry.
- Lightly abrade smooth surfaces to improve adhesion.
- Apply one or two coasts of base colour in Vinyl Silk/Satin/Eggshell or Semi Gloss acrylic or seal with Bedec Varnish on absorbent surfaces, allow to thoroughly dry (at least overnight) before applying Emulsion Glaze.
- Apply over prepared area with a brush or roller then break up colour as required with natural sponge, crumpled bag, rag or roller to obtain the desired effect, work on a manageable area at a a time avoiding overlaps and keep a wet edge going.
Guide for warm, low humidity
Conditions (above 20°C) - Mix six parts Emulsion Glaze to one part Emulsion Paint, for cool, high humidity.
Conditions (below 20°C) - Mix four parts Emulsion Glaze to one part Emulsion Paint
Ratios may be varied to suit application, temperature and humidity.
