Blackfriar
Quick Drying Radiator Paint Satin White 500ML

BN0605605Q
FREE next working day delivery available
£22.26 inc. VAT
Trade customer? - log in to get your prices. close

Tell us where you are to check stock for Click & Collect:

Tough & durable, non-yellowing, satin finish for interior use. Suitable for oil or water radiators.
Quick Drying Radiator Paint Satin White
  • Quick Drying Radiator Paint Satin White
Share...

In detail

Blackfriars Quick Drying Radiator Paint is a medium VOC content satin finish. A washable product which is thinned with water and is applied by brush. 

Suitable for interior use. it is touch dry in 1 hour and recoatable after 3 hours.

Size
500ML 
Application Methods
Brush
Coverage
Up to 14sq/m per litre 
VOC level
Medium 
Thinning
Water 
Touch dry
1-4 hours 
Recoatable
1-4 hours 
Scrubbability
Washable 
Colour
White 
Colour type
White 
Finish
Satin 
Cleanup
Water & Detergent 
Base
Water 

* Colours on screen may vary from actual paint

Available colours

Blackfriar Quick Drying Radiator Paint Satin White is available in 1 colours from the Blackfriar Colour Cards.

    Browse colours

     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     

    Always ask your client to try their colour choice on the wall first. Colour cards and emulsion sample pots are available at your local Brewers or at designerpaint.com

    Additional information

    Preparation
    Ensure surface to be coated is clean, dry, sound and free from wax, grease or any other contamination. Previously painted surfaces in sound condition should be finely abraded and degreased prior to direct application of Blackfriar Quick Drying Radiator Paint. Remove any rust and abrade back to a clean bright surface before priming with Blackfriar Multi-Surface Primer. Coat new or bare areas with Blackfriar Multi-Surface Primer.

    Application
    Stir thoroughly prior to use with a broad stirrer. The product may be applied by brush, roller or spray. If brushing, use a good quality soft brush, apply with light strokes finishing off in one direction. Leave to dry for one hour then turn the radiator on for one hour. Allow to cool then apply another coat if required following the same procedure. If spraying, the product may be thinned up to 10% with water if needed.

    Thinning
    Maximum 10% water.

    Limitations
    Do not use under cold (less than 10°C), damp or humid conditions. Do not apply to warm or hot surfaces. Protect from water or steam for 2-3 days after application. Avoid using harsh cleaning agents on the finish.

    Coverage
    Up to 14m² per litre per coat.

    Drying Time
    Touch dry in 1 hour. Heat radiator between coats.

    Clean Up
    Remove as much product as possible from application equipment before washing with water. Do not empty into drains or water courses. Some local authorities have special facilities for the disposal of waste coatings.

    Storage
    Store in a dry, safe place. Do not store in environments where extreme temperatures may occur. Keep within 5-30°C. Do not store in direct sunlight

    Related products

    Back