- Touch dry
- 12-24 hours
- 24 hours
- Light Grey
* Colours on screen may vary from actual paint
The substrate should be dry and clean, free from ascending humidity and sufficiently coherent. Pegakote can be applied directly on most mineral substrates. Curing compounds in case of poly concrete have to be removed by means of sand or grit blasting. On new concrete or non porous concrete, remove cement grout ny sand or grit blasting, treatment with diluted hydrochloric acid at a radio of 3 hydrochloric acid to 10 water of with Surfa-Etch 108.
For these two last solutions, there is obligation to rinse abundantly and to allow drying through of the surface. Porous substrates shall be impregnated with Pegakote diluted with 10 to 20% volume water. Pagakote may not be applied on an elastic paint coat or a moving substrate.
- Apply by brush, roller or airless spray.
Clean with water.