Rustins
Quick Dry ASAP Paint 1L

BN4600505N
All surface, all purpose paint which is water based and resists flaking or peeling due to its flexible capabilities.
Quick Dry ASAP Paint
Share...

In detail

Rustins ASAP Paint is an all surface, all purpose paint which is water based and resists flaking or peeling due to its flexible capabilities.

Can be applied over most other paints and varnishes and can be used directly onto wood, metal, plastic, industrial cladding, stone, UPVC, plaster, galvanised steel, MDF and many more.

Size
1L 
Application Methods
Brush
Coverage
Up to 14sq/m per litre 
VOC level
Low 
Touch dry
Up to 1 hour 
Recoatable
1-4 hours 
Suitable for...
Interior and Exterior use 
Colour
Black 
Colour type
Ready Mixed 
Finish
Satin 
Cleanup
Water & Detergent 
Base
Water-Based 

* Colours on screen may vary from actual paint

Available colours

Rustins Quick Dry ASAP Paint is available in 7 colours from the Rustins Colour Cards.

    Browse colours

     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     

    Always ask your client to try their colour choice on the wall first. Colour cards and emulsion sample pots are available at your local Brewers or at designerpaint.com

    Additional information

    Rustins All Surface All Purpose Paint is a water-based paint that resists flaking or peeling because of its flexible capabilities. It will go over most other paints and varnishes and can be used directly onto plastic, wood, metal, industrial cladding, stone, UPVC, plaster, MDF, galvanised steel and many more.

    Preparation

    The surface must be clean and free from wax and grease. Glossy areas will need to be sanded lightly to provide a key. If already painted, remove flaking paint by scraping or with Rustins Strypit Paint and Varnish Stripper. If applying to metal, remove any rust with a scraper or with Rustins Rust Remover. It is not necessary to apply Knotting to knots on bare wood, but if the wood is very absorbent, a coat of Rustins Primer & Undercoat may be applied before using the paint. Test on a small inconspicous area before painting the whole area.

    Application

    • Stir well before use: If not stirred until there is no sediment at the bottom of the tin, the paint may dry with a gloss finish.
    • Do not thin the product.
    • Apply evenly by brush.
    • One or two coats should be applied allowing 4 hours between coats in warm dry conditions.
    • Cold damp conditions will significantly extend the drying times.
    • Do not apply outdoors when foggy or likely to rain before the paint has dried.