Rustins
Radiator Enamel Gloss White 500ML

BN46045Q
Oil based, non yellowing & heat resistant, gloss finish for interior use on radiators.
Radiator Enamel Gloss White
Share...

In detail

Rustins Radiator Enamel Gloss is a high VOC content gloss finish. 

  • It is a washable oil based product which cannot be thinned and is applied by brush. 
  • It is suitable for interior use. 
  • It is touch dry in 4-8 hours and recoatable after 24 hours. 
Gloss is a tough, durable high sheen finish for wood and metal, providing good resistance to knocking and scuffing.

It can be applied over most previously painted surfaces without an undercoat. On new surfaces apply over the top of a suitable primer and undercoat.

Size
500ML 
Application Methods
Brush
Coverage
Up to 13sq/m per litre 
VOC level
High 
Thinning
Do not thin 
Touch dry
4-8 hours 
Recoatable
12-24 hours 
Scrubbability
Washable 
Colour
White 
Colour type
White 
Finish
Gloss 
Cleanup
Brush cleaner or White spirit 
Base
Oil 

* Colours on screen may vary from actual paint

Additional information

Rustins Radiator Enamel is based on a special non-yellowing acrylic resin emulsion pigmented with titanium oxide. Heat-resistant to 105°C. This produces a brilliant white finish that does not yellow on hot radiators. It is also excellent on wood which must be undercoated. It can also be used as a touch-up paint on white equipment such as refrigerators. Do not use at temperatures below 10°C or in conditions of high humidity.

Preparation
Previously painted radiators must be clean and free from flaking paint and rust. Clean with White Spirit, Rustins Surface Cleaner or Sugar soap. If existing paint is not white, apply a coat of Rustins Quick Drying Primer & Undercoat. Bare metal should be primed with Rustins Red Oxide Primer. Remove rust before priming with Rustins Rust Remover.

Application
Stir well before use. Apply liberally and evenly with a synthetic fibre brush. Allow radiators to cool before painting. Radiators can be used between coats if necessary.

Re-coating Time
The paint will be touch dry in approximately 30 minutes depending on temperature and humidity and can be re-coated after four hours.

Coverage
This tin will cover approximately 3m² in 1 coat depending on the absorbency of the surface.