Rust-Oleum Industrial
5090.5 Anti-Condensation White 5L

BN4817F
Thinner for Rust-oleum coatings , check product data sheet for compatibility and usage.
5090.5 Anti-Condensation White
Share...

In detail

Thinner for Rust-oleum coatings , check product data sheet for compatibility and usage.

Size
5L 

Available colours

Rust-Oleum Industrial 5090.5 Anti-Condensation White is available in 1 colours from the Rust-Oleum Industrial Colour Cards.

    Browse colours

     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     

    Always ask your client to try their colour choice on the wall first. Colour cards and emulsion sample pots are available at your local Brewers or at designerpaint.com

    Additional information

    Surface Preparation

    New concrete or brick surfaces should cure and dry for at least 30 days prior to application of the coating. Repair surface defects of (coated) concrete or brick surfaces. Remove grease, oil and all other surface contaminants by alkaline or high pressure (steam) cleaning. Scrape and wire brush carefully to remove deteriorated coatings. Sand previous coatings which are in good condition to remove gloss and to roughen the surface slightly. The surface may be slightly damp during application.

    Application

    • Temperature of air, substrate and coating material between 5 and 35°C and relative humidity below 85%.
    • The substrate temperature must be at least 5°C above dew point.